한국강구조학회 논문집 (Journal of Korean Society of Steel Construction)

한국강구조학회 (Korean Society of Steel Construction)
권호 표지

중량 조절계수를 이용한 고층 건물 변위설계법 개발

Development of the Drift Design Method of High-rise Buildings using Weight Control Factors

  • 투고 : 2004.11.15
  • 심사 : 2005.05.20
  • 발행 : 2005.06.27
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

고층 건물 변위설계는 고층건물 설계의 핵심 기술 중의 하나이며, 재분배 기법은 실용적인 고층건물 변위설계법으로 인식되고 있다. 재분배 기법은 구조 물량을 재분배함으로서 전체 구조물량의 변화없이 제어하고자 하는 변위를 최소화시키는 방법으로서, 재분배기법 적용에 의해서 최종 얻어지는 물량은 초기 물량의 영향을 받게 된다. 초기 물량이 과다한 모델의 경우, 재분배 기법을 적용하면 허용 변위는 충분히 만족하지만 물량 측면에서는 그 만큼의 절감 여지를 내포하고 있다고 볼 수 있다. 그러므로 중량 조절계수를 구조정식화에 포함시켜서 변위설계시 초기 설계안의 물량에 영향을 받지 않는 고층건물 변위설계 기법을 개발하였다. 제안된 변위설계법을 프레임-전단벽 구조물의 변위설계에 적용하여 그 결과를 분석한 결과, 제안된 방법은 초기 물량의 영향을 받지 않으며 고층건물 변위설계가 가능하였다.

Drift design is one of the core techniques in the structural design of high-rise buildings and resizing technique is regarded as a practical drift design method for high-rise buildings. In the resizing technique, the structural weight is re-distributed to minimize the target displacement without a change in structural weights. However, the structural weight determined from resizing algorithm is bound to the structural weight based on the preliminary design. Therefore, in this paper, a drift design method that can control the weight of the structure without causing drift control performance to deteriorate is proposed by incorporating the weight control factor in the formulation of resizing algorithm. The proposed drift design method is applied to the drift design of two frame-shear wall systems. The proposed drift design method, in this study, makes it possible to control both the drift and weight of a high-rise building.

키워드

과제정보

연구 과제 주관 기관 : 건설교통부

참고문헌

  1. AIK. (2000) Standard Design Loads for Buildings, Architectural Institute of Korea, Seoul, Korea
  2. Baker, W. F. (1990) Sizing techniques for lateral systems in multi-story steel buildings, 4th World Congress on Tall Buildings: 2000 and Beyond, CTBUH, Hong Kong, pp.857-868
  3. Chan, C. M., and Grierson, D. E. (1993) An efficient resizing techniques for the design of tall buildings subject to multiple drift constraints, The Structural Design of Tall Buildings, Vol. 2, No. 1, pp. 17-32 https://doi.org/10.1002/tal.4320020103
  4. Chan, C.M., Grierson, D.E., and Sherbourn, A.N. (1995) Automatic Optimal Design of Tall Steel Building Frameworks, Journal of Structural Engineering, ASCE, Vol. 121, No. 5, pp. 838-847 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:5(838)
  5. Charney, F. A. (1991) The use of displacement participation factors in the optimization of drift controlled buildings. Proceedings of 2nd Conference on Tall Buildings in Seismic Regions, 55th Regional Conference, Los Angeles, CA., pp. 91-98
  6. Cohn, M. Z. and Dinovitzer A. A.(1994) Application of Structural Optimization. Journal of Structural Engineering. ASCE, Vol. 120, No. 2, pp. 617-650 https://doi.org/10.1061/(ASCE)0733-9445(1994)120:2(617)
  7. Haftka, R.T. and Gurdal, Z. (1993) Elements of Structural Optimization, Kluwer Academic Publishers
  8. Leith J.P.B. and Topping B.H.V. (1999) Parallel simulated annealing for structural optimization. Computer and Structure., 73, 545-564 https://doi.org/10.1016/S0045-7949(98)00255-7
  9. Papadrakakis M. (Ed). (1993) Solving Large-scale problems in mechanics. Chichester: John Wiley & Sons, Inc
  10. Park Hyo Seon, Ahn Sun A.(1998) Resizing Methods for Drift Control of Tall Steel Structures, Structural Steel PSSC 98 Vol 2. pp1017-1022
  11. Park, H. S., Hong, K. P. and Seo. J. H.(2002) Drift Design of Steel-Frame Shear-Wall Systems for Tall Buildings, The Structural Design of Tall Buildings, Vol. 11, No. 2, pp. 35-49 https://doi.org/10.1002/tal.187
  12. Park, H. S., and Park, C. L. (1997) Drift control of high-rise buildings with unit load method, The Structural Design of Tall Buildings, Vol. 6, No. 1, pp. 23-35 https://doi.org/10.1002/(SICI)1099-1794(199703)6:1<23::AID-TAL80>3.0.CO;2-1
  13. Park, H.S. and Sung, C.W. (2002) Optimization of steel structures using distributed simulated annealing algorithm on a cluster of personal computer, Comp. Struct., Vol. 80, pp. 1305-1316 https://doi.org/10.1016/S0045-7949(02)00073-1
  14. Taranath B. S. (1998) Steel Concrete & Composite Design ofTall Buildings, McGraw-Hill
  15. Wada A. (1991) Drift Control Method for Structural Design of Tall Buildings, Proceedings of 2nd Conference on Tall Buildings in Seismic Regions, 55th Regional Conference, Los Angeles, CA., pp. 91-98