초록
콜로이드 실리카와 실란 종류에 따라서 졸겔코팅막의 특성에 미치는 영향을 조사하기 위하여 반응시간을 달리하여 졸을 합성하고, 합성된 졸의 코팅막 특성을 조사하였다. Colloidal Silica (CS)/methyltrimethoxysilane (MTMS) 졸겔코팅막은 CS/MTMS/epoxysilane (ES) 졸겔코팅막보다 접촉각이 증가하였고, 표면균질성이 우수하였다. CS/MTMS 코팅막은 $550^{\circ}C$까지 분해없이 잘 견디며, CS/MTMS/ES 코팅막은 $440^{\circ}C$까지 열분해없이 견디는 것으로 확인되었다. 단일 CS를 사용한 코팅막보다 혼합 CS를 사용한 코팅막이 코팅두께가 감소하였고, MTMS만을 사용한 것보다 MTMS/ES를 사용했을 때, 코팅두께가 더 감소하였다. 단일 CS를 사용한 경우 ES를 첨가하면 경도가 증가하지만, 혼합 CS를 사용한 코팅막의 경우 ES를 첨가하면 경도가 감소하였다.
Colloidal Silica (CS)/methyltrimethoxysilane (MTMS) and CS/MTMS/epoxysilane (ES) sol solutions were prepared using various synthesizing parameters such as reaction time and types of CS and silane. In order to understand their physical and chemical properties, sol-gel coating films on glass were fabricated. In the case of the CS/MTMS sol, the coating films had high contact angle and more enhanced flat surface than the CS/MTMS/ES sol. In the case of thermal stability, thermal degradation of the CS/MTMS and CS/MTMS/ES coating films did not occur up to $550^{\circ}C$ and $440^{\circ}C$, respectively. The coating films prepared from the CS/MTMS sol were thicker than those of the CS/MTMS/ES sol. In addition, the coating films prepared from single CS were thicker than those of mixed CS. Hardness of the coating films prepared from CS/MTMS increased by adding ES. In case of the mixed CS, the hardness decreased by adding ES.