Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

A Study of Deformation and Orientation Dependent Behavior in Single Crystals

  • Yang Chulho (School of Mechanical Engineering, Andong National University)
  • Published : 2005.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Deformations of single crystals were studied using finite element analysis to investigate the localized modes and the orientation dependence of plastic deformation observed in single crystals. Investigation of mechanical properties of single crystals is closely related with the understanding of deformation processes in single crystals. Localized bands such as shear and kink were studied and the material and geometric characteristics that influence the formation of such localized bands were investigated. Orientation dependence of material behavior in NiAl single crystals was studied by rotating slip directions from 'hard' orientation. The maximum nominal compressed stress in NiAl single crystals was widely ranged depending on the misalignment from 'hard' orientation. As the compression axis was set closer to 'hard' orientation, the maximum nominal compressed stress was rapidly increased and made <100> slips difficult to activate. Therefore, non-<100> slips will be activated instead of <100> slips for 'hard' orientation.

Keywords

References

  1. ABAQUS, 2003, User's Manual Version 6.4 Hibbitt, Karisson, and Sorensen, Inc
  2. Asaro, R. J., 1983, 'Micromechanies of Crystals and Polyerystals,' Adv. Applied Mech., Vol. 23, pp. 1-115 https://doi.org/10.1016/S0065-2156(08)70242-4
  3. Ball, A. and Smallman R. E., 1966, 'The Deformation Properties and Electron Microscopy Studies of the Intermetallic Compound NiAI,' Acta Metall., Vol. 14, pp. 1349-1355 https://doi.org/10.1016/0001-6160(66)90251-3
  4. Bassani, J. L., 1994, 'Plastic Flow of Crystals.' Adv. Appl. Mech., Vol. 30, pp. 192-258
  5. Brunner, D. and Gumbsch, P., 2001, 'The Flow Stress of NiAI Sihgle Crystals Below Room Temperature,' Mater. Sci. Eng., A319-321, pp. 337-341 https://doi.org/10.1016/S0921-5093(00)02009-8
  6. Chang, Y. W. and Asaro, R. J., 1980, 'Lattice Rotations and Localized Shearing in single Crystals,' Arch. Mech., Vol. 32, No. 3, pp. 369-388
  7. Crimp, M. A., Tonn, S. C., Zhang, Y., 1993, 'Dislocation Core Structures in B2 NiAI Alloys,' Mater. Sci. Eng., A170, pp. 95-102 https://doi.org/10.1016/0921-5093(93)90372-L
  8. Fraser, H. L. , Lorerto, M. H. and Smallman, R. E., 1973a, 'The Plastic Deformation of NiAI Single Crystals Between 300$^{circ}$K and 1050$^{circ}$K-II. The Mechanism of Kinking and Uniform Deformation,' Phil. Mag., Vol. 28, pp. 667-677 https://doi.org/10.1080/14786437308221010
  9. Fraser, H. L., Smallman, R. E. and Lorerto, M. H., 1973b, 'The Plastic Deformation of NiAl Single Crystals Between 300$^{\circ}$K and 1050$^{\circ}$K-I. Experimental Evidence on the Role of Kinking and Uniform Deformation in Crystals Compressed Along <001>,' Phil. Mag., Vol. 28, pp. 651-665 https://doi.org/10.1080/14786437308221009
  10. Hill, R., 1965, 'Continuum Micro-Mechanics of Elastoplastic Polycrystals,' J. Mech. Phys. Solids, Vol. 13, pp. 89-101 https://doi.org/10.1016/0022-5096(65)90023-2
  11. Hutchinson, J. W., 1970, 'Elastic-Plastic Behavior of Polyerystalline Metals and Composites,' Proc. R. Soc., London, Vol. A319, pp. 247-272 https://doi.org/10.1098/rspa.1970.0177
  12. Lahrman, D. F., Field, R. D. and Darolia, R., 1991, 'The Effect of Strain Rate on the Mechanical Properties of Single Crystals NiAl,' in: High Temperature Ordered Intermetallic Alloys IV (Edited by Johnson, L. et al.), MRS Proc., Vol. 213, pp. 603-607
  13. Lee, E. H., 1969, 'Elastic-Plastic Deformation at Finite strains,' J. Appl. Mech., Vol. 36, pp. 1-6 https://doi.org/10.1115/1.3564580
  14. Levit, V. I,, Winton, J. S., Yu, G. and Kaufman, M. J., 1996, 'Mechanisms of High Tensile Elongation in NiAl singfe Crystals at Intermediate Temperatures,' Proceedings Of the Rex 96, the Third International Conference on Recrystallization and Related Phenomina, (Edited by McNelley, T.), Monterrey, CA, pp. 637-644
  15. Messerschmidt, U., Haushalter, R and Bartsch, M., 1997, 'Microprocesses of the Deformation of NiAI single Crystals,' Mater. Sci. Eng., A234-236, pp. 822-825 https://doi.org/10.1016/S0921-5093(97)00323-7
  16. Mielec, J, Novak, V., Zarubova, N. and Gemperle, A., 1997, 'Orientation Dependence of Plastic Deformation in NiAI Single Crystals,' Mater. Sci. Eng., A234-236, pp. 410-413 https://doi.org/10.1016/S0921-5093(97)00164-0
  17. Miracle, D. B., 1993, 'The Physical and Mechanical Properties of NiAl,' Acta metall., Vol. 41, No. 3, pp. 649-684 https://doi.org/10.1016/0956-7151(93)90001-9
  18. Pan, J. and Rice, J. R., 1983, 'Rate Sensitivity of Plastic Flow and Implications for Yield- Surface Vertices,' Int. J. Solid Struct, Vol. 19, pp. 973-987 https://doi.org/10.1016/0020-7683(83)90023-9
  19. Pascoe, R. J. and Newey, C. W. A., 1968, 'Deformation Modes of the Intermediate Phase NiAI,' Physica. Status Solidi, Vol. 29, No. 1, pp. 357-366 https://doi.org/10.1002/pssb.19680290136
  20. Peirce, D., Asaro, R. J. and Needieman, A., 1983, 'Material Rate Dependence and Localized Deformation in Crystalhne Solids,' Acta metall., Vol. 31, No. 12, pp. 1951-1976 https://doi.org/10.1016/0001-6160(83)90014-7
  21. Tvergaard, V., Needleman, A. and Lo, K. K., 1981, 'Flow Localization in the Plane Strain Tensile Test,' J. Mech. Phys. Solids, Vol. 29, pp. 115-142 https://doi.org/10.1016/0022-5096(81)90019-3
  22. Winton, J. S., 1995, 'The Effect of Orientation, Temperature, and Strain Rate on the Mechanical Properties of NiAI Single Crystals,' MS thesis, Univ. of Florida, Gainesville, FL.
  23. Yang, C. and Kumar, A. V., 1997, 'Simulation of Deformation in NiAI Single Crystals,' International ME Congress and Exposition, Dallas, TX, pp. 124-129
  24. Yang, C. and Kumar, A. V., 2001, 'Investigation of Strain Hardening in NiAI Single Crystals Using Three-Dimensional FEA Models.' J. Eng. Mat. and Tech., ASME, Vol. 123, No. 1, pp. 20-27 https://doi.org/10.1115/1.1286158