The Evaluation of STS304 Coating Layer on S45C Substrate by Friction Surfacing Process

마찰 육성법을 이용한 S45C 탄소강에 대한 STS304의 코팅층 특성 평가

  • 노중석 (주식회사 태광테크 기술연구소) ;
  • 조현진 (포항산업과학연구원 용접센터) ;
  • 김흥주 (포항산업과학연구원 용접센터) ;
  • 천창근 (포항산업과학연구원 용접센터) ;
  • 장웅성 (포항산업과학연구원 용접센터)
  • Published : 2005.12.01

Abstract

Friction surfacing of STS304 consumable rod on S45C substrate was investigated by microstructural observation and mechanical tests. STS304 layer formed a strongly-bonded thick layer under a wide range of surfacing conditions. The highest coating eefficiency was obtained in the condition of 1000rpm-2.5mm/sec-2.5mm/sec. The hardness distribution showed the peak value in the boundary layer and as the consumable rotation speed increased, the boundary layer also hardness increasing. As the consumable rotation speed and the traveling speed increased, the coating efficiency tended to decrease. On the other hand, as the feeding speed increased, the coating efficiency appeared to be increased. The new Fe-Cr-Ni alloy layer is showed in the interface layer on $5\~15{\mu}m$ width. After friction surfacing, corrosion resistance of STS 304 surfacing layers were equaled to that of STS304 consumable rod.

Keywords

References

  1. T. Shinoda, S. Okamoto, S.Takemoto, Y.kato, T.Shimizu : Depositon of hard surfacing layer by friction surfacing, Welding International, 10-4(1996), 288-294
  2. K. FUKAKUSA : On the characteristics of the rotational contact plane-A fundamental study of friction surfacing, Welding International, 1996, 10(7), 524-529 https://doi.org/10.1080/09507119609549043
  3. A.W.Batchelor, S.Jana, C.P.Koh, C.S.Tan : The effect of metal type and multi-layering on friction surfacing, Journal of Materials Processing Technology, 57(1996), 172-181 https://doi.org/10.1016/0924-0136(95)02057-8