References
- D. Montgomery, Introduction to statistical quality control, New York, NY: Wiley, 1991
- B. Kim and G. May, 'Real-time diagnosis of semiconductor manufacturing equipment using a hybrid neural network expert system', IEEE Trans. Semi. Manufac., Vol. 20, No.1, p. 39, 1997
- C. Almgren, 'The role of RF measurements in plasma etching', Semiconductor International, Vol. 19, No.8, p. 99, 1997
- D. H. Holkeboer, T. L. Karandy, F. C. Currier, L. C Frees, and R. E. Ellefson, 'Miniature quadrupole residual gas analyzer for process monitoring at milli'Torr pressure', J. Vac. Soc. Technol. A, Vol. 16, No.3, p. 1157, 1998
- J. Roland, P. Marcoux, G. Ray, and G. Rnakin, 'Endpoint detection in plasma etching', J. Vac. Sci. Technol. A, Vol. 3, p. 631, 1985
- R. Shadmehr, D. Angell, P. B. Chou, G. S. Oehrlein and R. Jaffe, 'Principal component analysis of optical emission spectroscopy and mass spectrometry: Application to reactive ion etch process parameter estimation using neural networks', J. Electrochem. Soc., Vol. 139, No.3, p. 907, 1992
- S. Hong, G. May, and D. Park, 'Neural network modeling of reactive ion etch using optical emission spectroscopy data', IEEE Trans. Semi. Manufac., Vol. 16, No.4, p. 1,2003
- J. G. Shabushing and P R. Demiko, 'Application of optical emission spectroscopy to semiconductor device fabrication', American Laboratory, p. 60, 1984
- S. Hong, D. Park, and G. May, 'Modeling optical emission spectroscopy data generated during reactive ion etching using an autoencoder neural network', Smart Engineering System Design: Neural Networks, Fussy Logic, Evolutionary Programming, Data Mining and Complex Systems, Vol. 12, p. 945, (C.H. Dagli, Ed.), New York: ASME Press, 2002
- V. Cornello, 'RGAs Provides Real Time Process Control', Semi. International, p. 70, 1990
- PPT for Wondows User Guide, The UTI Division of MKS Instruments. Inc., 1996
- B. Roger, M. Berry, I. Turlik, P. Garrow, and D. Castillo, 'Soft mask for via patterning in benzocyclobutene', Int. J. Micro. and Elect. Packaging, Vol. 17, No.3, p. 210, 3rd Quarter, 1994
- I. T. Jolleffe, Principal component analysis, New York, NY: Springer-Verlag, 1986
- D. White, D. Boning, S. Butler, and G. Barna, 'Spatial characterization of wafer state using principal component analysis of optical emissions spectra in plasma etch', IEEE Trans. Semi. Manufac., Vol. 10, No.1, p. 52, 1997
- C. Himmel and G. May, 'Advantages of plasma etch modeling using neural networks over statistical techniques', IEEE Trans. Semi. Manufac., Vol. 6, No.2, p. 103, 1993
- G. May, 'Computational Intelligence in Microelectronics Manufacturing', Chapter 13, The Handbook of Computational Intelligence in Design and Manufacturing (J. Wang and A. Kusiak, Eds.), Boca Raton, FL: CRC Press, 2001
- S. Haykin. Neurnl Networks. New York., NY: Macmillan College Puhlishing Company. 1994
- S. Hong and G. May. 'Newrai netwot:k hased time series modeling of optical emission spectrosropy data for fault detection in reactive ion etclring'. Proc. of SPIE Conf. on Am:. Microelec. Mamrfac .Santa Clara. CA. Vol. 5041.p. 1.2003
Cited by
- Delamination Analysis of Low-Temperature Processed SU-8 Photoresist for MEMS Device Fabrication vol.345-346, pp.1662-9795, 2007, https://doi.org/10.4028/www.scientific.net/KEM.345-346.1397