Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

The Study on Reduction of Scanning Path Build Time According to Control of STL file Slicing Height - Application of Small Jewellery

STL File 슬라이싱 높이 조정에 따른 주사경로 생성시간 저감에 관한 연구 - 소형 보석류에 적용

  • Published : 2005.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper addresses the correlation between the change of file size and the scanning path build time by the slicing height of STL file. Though the study about STL file has been achieved quite actively scanning path build time using STL file is not investigated so much to be satisfied. The file size depends on the number of polygon created by the slicing height specified. And this number of polygons increases in a regular rate. The correlation between the number of polygons and the scanning path build time is examined and verified.

Keywords

References

  1. Choi, H. T., Lee, S. H., 'A study on Error Verification of STL Format for Rapid Prototyping System,' KSPE, Vol. 13, No. 10, pp.46-55, 1996
  2. Chae, H.C., 'Creation of Topological Information from STL Using Triangle Based Geometric Modeling,' KSPE, Vol. 14, No.2, pp. 136-144, 1997
  3. Park, J. B., Son, Y. J., Kim, S. K., Jeon, E. C., Kim, J. W., 'A Study on DB Construction for Error Modification of STL Format and Efficiency by Shape Restoration,' KSPE, Vol. 16, No.9, pp.143-148, 1999
  4. Lee, G. H., 'Generation of Laser Scanning Path for the Stereo lithography using Voronoi diagram,' Dept of Mechanical and Production Engineering, Graduate School, P. N. U., pp. 3-8, 1998
  5. Choi, H.T., Lee, S.H., 'A study on laser scan path generation for improving the precision of stereolithographic parts,' KSPE, Vol. 13, No.12, pp.142-150 1996
  6. Held, M., Lukacs, G., Andor, L., 'Pocket machining based on contour-parallel tool paths generated by means of proximity maps,' Computer Aided Design, Vol. 26, No.3, pp. 189-203, 1996 https://doi.org/10.1016/0010-4485(94)90042-6
  7. Ahn, D. K., Kim, J. U., Lee, S. H., Back, I. H., 'A study on laser scan path generation for manufacturing 3-dimensional body using Stereolithography,' KSPE Proceeding, pp. 687-692, 1994
  8. Shin, M. C., Son, H. G., Yang, D. Y., 'Experimental Study of Direct Metal Prototyping Processing,' KSPE, pp. 169-175, 1995