Abstract
This study analysed response spectrum using the observed ground motion from the mine blasting and, then compared the results to the seismic design response spectra applied domestic nuclear power plants. The results showed that the resultant response spectra above 20 Hz revealed higher values than the design response spectra and those below 20 Hz revealed much lower values. These facts suggest that the analysis of response spectrum should be applied to the analysis of impacts to frequency dependent structures in addition to the analysis of peak values of ground motions.
본 연구는 가행중인 석회석광산에서 측정된 발파진동을 이용하여 응답스펙트럼을 분석하였으며 국내 원자력 관련 구조물의 내진설계 기준과 비교하였다. 연구에 이용된 발파진동 개수는 수평성분 및 수직성분 각각 43개이다. 국내 원자력시설물의 내진기준인 Reg. Guide 1.60과 비교한 결과 약 20Hz를 중심으로 고주파 영역에서 발파진동에 의한 MPOSD 스펙트럼 및 Mean 스펙트럼 값이 Reg. Guide 1.60보다 값이 높게 나타나고, 약 20Hz를 중심으로 저주파수 영역에서는 값이 현저하게 낮게 나타나고 있다. 구조물 피해를 최소화를 위한 시험발파를 통한 최대 지반진동값을 적용하는 것도 중요하지만 각종 구조물에 대한 영향을 복합적으로 해석하기 위해 응답 스펙트럼 특성을 부가하여 적용할 필요가 있다.