International Journal of Air-Conditioning and Refrigeration

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지

Optimization of a Thermally Asymmetric Rectangular Fin: Based on Fixed Fin Height

  • Kang, Hyung-Suk (Division of Mechanical & Mechatronics Engineering, Kangwon National University)
  • Published : 2005.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

A thermally asymmetric straight rectangular fin is analysed and optimized using the two-dimensional separation of variables method. The optimum heat loss is presented as a function of bottom to top Biot number ratio, fin base length and top Biot number. Decreasing rate of the optimum fin length with the increase of the fin base length is listed. The optimum fin tip length is shown as a function of bottom to top Biot number ratio, fin base length and tip to top Biot number ratio. One of the results shows that the optimum heat loss and the actual optimum fin length decrease while the optimum fin tip length increases as the fin base length increases.

Keywords

References

  1. Abrate, S. and Newnham, P., 1995, Finite element analysis of triangular fin attached to a thick wall, Computer & Structures, Vol. 57, No. 6, pp. 945-957 https://doi.org/10.1016/0045-7949(95)00105-P
  2. Kang, H. S., 2001, Three-dimensional performance analysis of a thermally asymmetric rectangular fin, Int. J. of Air-Conditioning and Refrigeration, Vol. 9, No. 2, pp. 94-101
  3. Hrymak, A. N., McRae, G. J. and Westerberg, A. W., 1985, Combined analysis and optimization of extended heat transfer surfaces, ASME J. Heat Transfer, Vol. 107, No. 3, pp. 527-532 https://doi.org/10.1115/1.3247456
  4. Ullmann, A and Kalman, H., 1989, Efficiency and optimized dimensions of annular fins of different cross-section shapes, Int. J. Heat Mass Transfer, Vol. 32, pp. 1105-1110 https://doi.org/10.1016/0017-9310(89)90095-1
  5. Chung, B. T. F., Abdalla, M. H. and Liu, F., 1989, Optimization of convective longitudinal fins of trapezoidal profile, Chem. Eng. Comm., Vol. 80, pp. 211-223 https://doi.org/10.1080/00986448908940525
  6. Yeh, R. H., 1996, Errors in one-dimensional fin optimization problem for convective heat transfer, Int. J. Heat Mass Transfer, Vol. 39, No. 14, pp. 3075-3078 https://doi.org/10.1016/0017-9310(95)00331-2
  7. Casarosa, C. and Franco, A., 2001, On the optimum thermal design of individual longitudinal fins with rectangular profile, Heat Transfer Engineering, Vol. 22, No. 1, pp. 51-71
  8. Razelos, P. and Satyaprakash, B. R., 1993, Analysis and optimization of convective trapezoidal profile longitudinal fins, ASME J. of Heat Transfer, Vol. 115, No. 2, pp. 461-463 https://doi.org/10.1115/1.2910699
  9. Look, D. C. Jr. and Kang, H. S., 1992, Optimization of a thermally non-symmetric fin: preliminary evaluation, Int. J. Heat Mass Transfer, Vol. 35, No. 8, pp. 2057-2060 https://doi.org/10.1016/0017-9310(92)90207-9
  10. Kang, H. S. and Look, D. C. Jr., 2004, Optimization of thermally and geometrically asymmetric trapezoidal fins, AIAA J. of Thermophysics and Heat Transfer, Vol. 18, No. 1, pp, 52-57 https://doi.org/10.2514/1.9121