References
- Bauerle, D., 1996, Laser Processing and Chemistry, Springer
- Duely, W. W., 1999, Laser Welding, John Wiely & Sons, Inc.
- Ha, E. and Kim, W., 2004, 'A Study of Low-Power Density Laser Welding Process with Evolution of Free Surface,' Trans. of the KSME (B), Vol. 28, No. 10, pp. 1202-1209 https://doi.org/10.3795/KSME-B.2004.28.10.1202
- Chan, C. L. and Mazumder, J., 1987, 'One-Dimensional Steady-State Model for Damage by Vaporization and Liquid Expulsion due to Laser-Material Interaction,' J. Appl. Phys., Vol. 62, pp. 4579-4586 https://doi.org/10.1063/1.339053
- Kar, A. and Mazumder, J., 1990, 'Two-Dimensional Model for Material Damage due to Melting and Vaporization During Laser Irradiation,' J. Appl. Phys., Vol. 68, pp. 3884-3891 https://doi.org/10.1063/1.346275
- Kar, A. and Mazumder, J., 1992, 'Two-Dimensional Model for Laser-Induced Material Damage: Effects of Assist Gas and Multiple Reflections Inside the Cavity,' J. Appl. Phys., Vol. 71, pp. 2560-2569 https://doi.org/10.1063/1.351072
- Lim, J., 1993, A Computational Analysis of Deep Penetration Laser Welding, Ph. D.'s thesis, University of Arizona
- Ganesh, R. K., Bowley, W. W., Bellantone, R. R. and Hahn, Y., 1996, 'A Model for Laser Hole Drilling in Metals,' J. Comput. Phys., Vol. 125, pp. 161-176 https://doi.org/10.1006/jcph.1996.0086
- Ki, H., Mohanty, P. S. and Majumder, J., 2001, 'Modelling of High-Density Laser-Material Interaction Using Fast Level Set Method,' J. Phys. D: Appl. Phys., Vol. 34, pp. 364-372 https://doi.org/10.1088/0022-3727/34/3/320
- Rider, W. J. and Kothe, D. B., 1998, 'Reconstructing Volume Tracking,' J. Comput. Phys., Vol. 141, pp. 112-152 https://doi.org/10.1006/jcph.1998.5906
- Brackbill, J. U., Kothe, D. B. and Zemach, C. A., 1992, 'Continuum Method for Modeling Surface Tension,' J. Comput. Phys. Vol. 100, pp. 335-354 https://doi.org/10.1016/0021-9991(92)90240-Y
- Knight, C. J., 1979, 'Theoretical Modeling of Rapid Surface Vaporization with Back Pressure,' AIAA J., Vol. 17, pp. 519-523 https://doi.org/10.2514/3.61164
- Kothe, D. B. and Mjolsness, R. C., 1991, 'RIPPLE: A New Model for Incompressible Flows with Free Surfaces,' AIAA 91-3548
- Swaminathan, C. R. and Voller, V. R., 1993, 'On the Enthalpy Method,' Int. J. Num. Meth. Heat Fluid Flow, Vol. 3, pp. 233-244 https://doi.org/10.1108/eb017528