Fatigue Crack Detection Test of Weldments Using Piezoceramic Transducers

  • KIM MYUNG HYUN (Department of Naval Architecture and Ocean Engineering, Pusan National University) ;
  • KANG SUNG WON (Department of Naval Architecture and Ocean Engineering, Pusan National University) ;
  • KEUM CHUNG-YON (Department of Naval Architecture and Ocean Engineering, Pusan National University)
  • Published : 2005.08.01

Abstract

Large welded structures, including ships and offshore structures, are normally in operation under cyclic fatigue loadings. These structures include many geometric discontinuities, as well as material discontinuities due to weld joints. The fatigue strength at these hot spots is very important for the structural performance. In the past, various Non Destructive Evaluation (NDE) techniques have been developed to detect fatigue cracks and to estimate their location and size. However, an important limitation of most of the existing NDE methods is that they are off line; the normal operation of the structure has to be interrupted, and the device often has to be disassembled. This study explores the development of a structural health monitoring system, with a special interest in applying the technique to welded structural members in ship and offshore structures. In particular, the impedance based structural health monitoring technique that employs the coupling effect of piezoceramic (PZT) materials and structures is investigated.

Keywords

References

  1. Cho S.M. and Horikawa K. (1988), 'A Prediction of Intial Fatigue Crack Propagation Life in a Notched component Taking Elasto-Plastic Behavior,' Vol 2, No 4, pp 61-70
  2. Doebling, S.W., Farrar, C.R., Prime, M.B., and Shevitz, D.W. (1996), Damage Identification and Health Monitoring of Structural and Mechanical Systems from Changes in Their Vibration Characteristics, A Literature Review, Los Alamos National laboratory Report LA-13070-MS
  3. Giurgiutiu, V. and Rogers, C.A. (1997), 'Electro-mechanical (E/M) Impedance Method for Structural Health Monitoring and Non-destructive Evaluation', International Workshop on Structural Health Monitoring. Stanford University, CA, pp 433-444
  4. Inman, D.J. (1998), 'Smart Structures Solutions to Vibration Problems', Proceedings, of International Conference on Noise and Vibration Engineering, Leuven, Belgium, pp 1-12
  5. Kim, M.H. (2002), 'Simultaneous Health Monitoring and Vibration Control of Adaptive Structures using Smart Sensors', Shock and Vibration, Vol 9, No 6, pp 329-33 https://doi.org/10.1155/2002/264158
  6. Kim, M.H, Kang, S.W., Na, S.S., Park, G. and Inman, D.J. (2004), 'An Impedance-based Health Monitoring System with Application to Welded Structures', 15th International Conference on Adaptive Structures and Technologies, Bar Harbor, Maine, U.S.A
  7. Liang, C., Sun, F.P. and Rogers, C.A. (1994), 'An Impedance Method for Dynamic Analysis of Active Material System', Journal of Vibration and Acoustics, Vol 116, pp 121-128
  8. Nam K. W. and Kim S.J. (1999), 'Life Prediction by Retardation Behavior of Fatigue Crack and its Nondestructive Evaluation,' Vol 13, No 3-1, pp 36-48
  9. Park, G., Kabeya, K., Cudney, H. and Inman, D.J. (1999), 'Impedance-Based Structural Health Monitoring for Temperature Varying Applications', JSME International Journal, Vol 42, pp 249-258
  10. Park, G., Cudney, H. and Inman, D.J. (2000), 'Impedance-Based Health Monitoring of Civil Structural Components', ASCE, Journal of Infrastructure Systems, Vol 6, No 4, pp 153-160 https://doi.org/10.1061/(ASCE)1076-0342(2000)6:4(153)
  11. Park, G., Sohn, H., Farrar, C.R. and Inman, D.J. (2003), 'Overviewof Piezoelectric Impedance-Based Health Monitoring and Path Forward', Submitted to The Shock and Vibration Digest
  12. Peairs, D.M., Park, G. and Inman, D.J. (2001), 'Self-monitoring and Self-healing Bolted Joint', Proceedings of 3rd International Workshop on Structural Health Monitoring, Stanford, CA, pp 430-439
  13. Sun, F., Chaudhry, F.,Z., Liang, C. and Rogers, C.A. (1995), 'Truss Structure Integrity Identification Using PZT Sensor-Actuator', Journal of Intelligent Material Systems and Structures Vol 6, pp 134-139 https://doi.org/10.1177/1045389X9500600117