수직 액막형 흡수기의 성능 최적화에 관한 연구

Study on the Optimization of Absorption Performance of the Vertical Tube Absorber with Falling Film

  • Kim, Jung-Kuk (Graduated School of Mechanical Engineering, Sungkyunkwan Univeristy) ;
  • Cho, Keum-Nam (School of Mechanical Engineering, Sunkyunkwan University)
  • 발행 : 2005.09.01

초록

The present study investigated the optimization of the absorption performance of the vertical absorber tube with falling film by considering heat and mass transfer simultaneously. Effects of film Reynolds number, geometric parameters by insert device (spring) and flow pattern on heat and mass transfer performances have been also investigated. Especially, effects of coolant flow rate and the flow pattern by geometric parameters has been observed for the total heat and mass transfer rates through both numerical and experimental studies. Based on both predicted values, the optimal coolant flow rate was predicted as 1.98 L/min. The maximum absorption rate of the spring inserted tube was increased by the maximum of $20.0\%$ than those for uniform film of bare tube. Average Sherwood numbers and Nusselt numbers were increased as Reynolds numbers increased under the dynamic and geometric conditions showing the maximum absorption performance.

키워드

참고문헌

  1. Ministry of Commerce, Industry and Energy Republic of Korea, 2004, Energy polices of Korea, Report RP 2004-03-024
  2. Patnaik, V. and Perez-Blanco, H., 1996, Roll waves in falling films: an approximate treatment of the velocity field, Int. J. of Heat and Fluid Flow, Vol. 17, No.1, pp. 63-70 https://doi.org/10.1016/0142-727X(95)00075-2
  3. Morioka, I. and Kiyota, M, 1991, Absorption of water vapor into a wavy film of an aqueous solution of LiBr, JSME Int. J Series II, Vol. 34, No.2, pp. 183-188
  4. Shkadov, V. K., 1996, Wave flow regimes of a thin layer of viscous fluid subject to gravity, Fluid Dynamics Research, Vol. 28, pp.43-51
  5. Moffat, R.J., 1985, Using uncertainty analysis in the planning of an experiment, Trans. of the ASME: J. of Fluid Engineering, Vol. 107, pp. 173-182 https://doi.org/10.1115/1.3242452
  6. Kawae, N., Shigehi, T., Kanemaru, K. and Yamada, T., 1989, Water Vapor Absorption into Laminar Film Flow of a Lithium Bromide Water Solution (Influence of Variable Properties and Inlet Film Thickness on Absorption Mass Transfer Rate), Scripta Technica Inc., pp.58-70
  7. Kim, S. C., Oh, M. D. and Lee, J. H., 1995, A numerical study on heat and mass transfer in a falling film of vertical plate absorber cooled by air, Transaction of the KSME, Vol. 19, No.4, pp. 1071-1082
  8. Kapitza, P. L., 1965, Collected Papers of P. L. Kapitza : Wave Flow of Thin Layers of a Viscous Fluid, Pergamon Press, pp.662-709
  9. Penev, V., Krylov, V. S., Boyadjiev, C. H. and Vorotilin, V. P., 1972, Wavy flow of thin liquid films, Int. J. of Heat and Mass Transfer, Vol. 15, pp. 1395-1406 https://doi.org/10.1016/0017-9310(72)90019-1
  10. Kim, J.K. and Cho, K.N., 2004. Effect of wavy flow of vertical falling film on the absorption performance, Korea J. of Air-Conditioning and Refrigeration Engineering, Vol. 16, No.2, pp. 825-832
  11. Grossman, G., 1984, Simultaneous heat and mass transfer in absorption of gases in turbulent liquid film, Int. J. of Heat and Mass Transfer, Vol. 27, No. 12, pp.2366-2376