DOI QR코드

DOI QR Code

실험적 MR댐퍼 모델을 사용한 1/4 차량 진동 시뮬레이션

1/4 Car Vibration Simulation Using an Empirical MR Damper Model

  • 양보석 (부경대학교 기계공학부) ;
  • 이종석 (부경대학교 대학원 기계공학부) ;
  • 강태호 (부경대학교 대학원 기계공학부) ;
  • 류성원 (부경대학교 대학원 기계공학부) ;
  • 백운경 (부경대학교 기계공학부)
  • 발행 : 2005.09.01

초록

This study is about a semi-active quarter car simulation method including a MR(magneto-rheological) damper. The MR damper was modeled as Spencer model that can capture nonlinear and hysteretic behavior. The parameters of the Spencer model were extracted from a random excitation test and optimum treatment of the test data. Then, a suspension control algorithm based on Sky-hook theory was applied for the quarter car simulation. Also, an experiment was done using a quarter car simulator to confirm the simulation results with the Spencer MR damper model.

키워드

참고문헌

  1. Spencer, B. F., Dyke, S. J., Sain, M. K. and Carlson, J. D., 1997, 'Phenomenological Model for Magnetorheological Dampers', Journal of Engineering Mechanics, Vol. 123, No. 3, pp. 230-238 https://doi.org/10.1061/(ASCE)0733-9399(1997)123:3(230)
  2. Sain, P. M., Sain, M. K., Spencer, B. F. and Sain, J. D., 1998. 'The Bouc Hysteresis Model: An Initial Study of Qualitative Characteristics', Proceedings of the American Control Conference, Philadelphia, Pennsylvania, pp. 2559-2563
  3. Chang, C. C. and Roschke, P., 1998, 'Neural Network Modeling of a Magnetorheological Damper', Journal of Intelligent Material Systems and Structures, 9, pp. 755-764 https://doi.org/10.1177/1045389X9800900908
  4. Choi, S. B. and Lee, S. K., 2001, 'A Hysteresis Model For The Field-dependent Damping Force of A Magnetorheological Damper', Journal of Sound and Vibration, Vol. 245, No. 2, pp. 375-383 https://doi.org/10.1006/jsvi.2000.3539
  5. Yao, G. Z., Yap, F. F., Chen, G., Li, W. H. and Yeo, S. H., 2002, 'MR Damper and its Application for Semi-active Control of Vehicle Suspension System', Mechatronics, 12, pp. 963-973 https://doi.org/10.1016/S0957-4158(01)00032-0
  6. Han, S. S. and Choi, S. B. 2002, Control Performance of an Electrorheological Suspension System Considering Actuator Time Constant', Int. Journal of Vehicle Design, Vol. 29, No. 3, pp. 226-242 https://doi.org/10.1504/IJVD.2002.002011
  7. Lee, H. S. Choi, S. B. and Lee, S. K., 2000, 'Vibration Control of a Passenger Vehicle Featuring MR Suspension Units', Transactions of Korean Society for Noise and Vibration Engineering, Vol. 11, No. 1, pp. 41-48
  8. Karnopp, D., Crosby, M. J. and Harwood, R. A., 1973, 'Vibration Control Using Semi-active Force Generators', Journal of Engineering for Industry, ASME No. 73-DET-122, pp. 619-626
  9. Christopher, A. P., 1998, 'Experimental Evaluation of Semiactive Magneto-Rheological Suspensions for Passenger Vehicles', M. S. Thesis, Virginia Polytechnic Institute and State University
  10. Charalambous, C., Brunning, A. and Crawford, I. L., 1989, 'The Design and Advanced Development of a Semi-active Suspension', IMechE
  11. Junich Emur, Shinobu Kakizaki, Fumiyuki Yamaoka, and Michiya Nakamura, 1994, 'Development of the Semi-acitve Suspension System Based on the Sky-hook Damper Theory', SAE940863
  12. Vanderplaats R&D, VisualDOC Getting Started Manual, 2004, Vanderplaats Research & Development