Abstract
The CFL linearisation chip which is one of key devices in ultra-narrowband mobile radio transmitter using CQPSK digital modulation method is designed and implemented with $0.35{\mu}m$ CMOS technology. The reduced size and low cost of transmitter are available by the use of direct-conversion and CFL ASIC chip, which improve the power effi챠ency and linearity of transmitting path. In addition, low power operation is possible through CMOS technology The performance test results of transmitter show -25 dBc improvement of IMD level at the 3 kHz frequency offset and then satisfy FCC 47 CFR 90.210 E emission mask in the operation of CFL ASIC chip. At that time, the transmitting power is about PEP(Peak-to-Envelope Power) 5 W. The main parameters to improve the transmitting characteristic and to compensate the distortion in feed back loop such as DC-offset, loop gain and phase value are interfaced with notebook PC to be controlled with S/W.
CQPSK(Compatible QPSK) 디지털 변조 기술을 이용하는 초협대역 단말기용 송신기에 가장 핵심적인 부품들 중의 하나인 카테지안 궤환 루프(CFL: Cartesian Feedback Loop) 선형화 칩을 $0.35{\mu}m$ CMOS 기술을 이용하여 설계 및 제작하였다. 직접 변환 방식 및 CFL칩을 이용하여 요구되는 부품 수를 줄임에 의하여 송신기의 저비용 및 소형화가 가능하고, 이를 통하여 송신 전력 효율 및 선형성을 향상시켰다. 또한 CMOS기술을 통하여 저전력 구동이 가능하도록 하였다. 송신 성능 시험 결과 PEP 37 dBm(5 W)의 출력 전력에서 CFL 칩을 구동하여 -25 dBc의 상호 변조 왜곡(@ 3 kHz주파수 오프셋) 개선을 통하여 FCC 47 CFR 90.210 E에 정의된 방사 마스크 규격을 만족함을 확인하였다. 또한 상기 언급된 송신 특성 개선에 가장 영 향을 미치는 성분들인 DC-offset 성분, 궤환 루프에서 발생하는 왜곡 성분을 보상하기 위한 루프 이득 및 위상 값들을 조정할 수 있도록 컴퓨터와의 외부 인터페이스를 구현하여 소프트웨어적으로 이러한 값들을 제어할 수 있도록 프로그램화 하였다.