Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지

A Study on the Velocity Profiles and Pressure Distributions in Ejector Linking Inhale Duct

흡입관이 부착된 이젝터의 속도분포와 압력분포 연구

  • 이행남 (조선대학교 기계공학과) ;
  • 박길문 (조선대학교 기계공학과) ;
  • 이덕구 (조선대학교 대학원 기계공학과) ;
  • 설재림 (조선대학교 대학원 기계공학과)
  • Published : 2005.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

The ejector is used to obtain a vacuum state, and it has been applied to a lot of industry field such as a heat engine, a fluid instrument power plant. a food industry, an environment industry etc., because there is no problem even it is mixed with any kind of liquid, gas. and solid. The flow characteristics in the ejector was investigated by a PIV and a CFD. The agreement between numerical analysis and experiment shows the validity of this study and the results of this study would be useful to the engineers who design for the flow systems for heating. ventilation. air conditioning and wastewater purification plants.

Keywords

References

  1. Ph.D Thesis. Chosun. Univ.: Koh.Y.H, 'A Study on Turbulent Characteristics of Developing Turbulent Steady and Unsteady Flows in the Entrance Region of a Square Duct', 1992
  2. Sun, D.W, and Eames, I.E., 'Recent developemets in the design the-ories and applications of Ejectors-a review', Journal of the Institute of Energy, Vol. 68, June, pp. 665-676, 1995
  3. Witte, J.H., 'Efficiency and design of liquid-gas ejector', British-chemical Engineering, Vol. 10, No. 9 pp. 602-607, 1965
  4. Biswas, M.N, and Mitra, A.K., 'Momentum Transfer in Horizontal Engineering multi-jet liquid-gas ejector', The Canadian Journal of Chemical Engieering, Vol. 59, pp. 634-637, 1989
  5. 윤석훈, 이원형, 전현필, '각종 이젝터를 이용한 진공 냉각장치', 한국박용기계학회지. pp. 229-304, 1995
  6. 오석영. 송길섭, '혼합탱크 내의 임펠라 형태에 따른 유동 특성에 관한 수치해석', 유체기계연구개발 발표회 논문집, pp. 454-459, 2001
  7. 이행남, 이덕구, 박지만, '흡입관이 부착된 이젝터의 효과에 관한 연구' 한국박용기관학회 추계학술대회 논문집, pp. 107-112, 2003