이온질화된 공구강 표면의 산화 및 공식거동

Corrosion and Oxidation Behaviors of ion-nitrided tool Steels

  • 최한철 (조선대학교 치과재료학교실 및 생체재료나노계면활성화센터) ;
  • 이호종 (순천대학교 재료금속공학과) ;
  • 정용운 (순천대학교 재료금속공학과)
  • Choe Han-Cheol (Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, Chosun University) ;
  • Lee Ho-Jong (Department of Materials Science and Metallurgical Engineering, Sunchon National University) ;
  • Jeong Yong-Woon (Department of Materials Science and Metallurgical Engineering, Sunchon National University)
  • 발행 : 2005.06.01

초록

SKD 11 steel has been widely used for tools, metallic mold and die for press working because of its favorable mechanical properties such as high toughness and creep strength as well as excellent oxidation resistance. The ion nitrided tool steel containing Mo results in improvement of corrosion resistance, strength at high temperature and pitting resistance, especially in $Cl^-$ contained environment. But the Mo addition causes a disadvantage such as lower oxidation resistance at elevated temperature. In this study, several effects of ion-disadvantage on the oxidation characteristics for SKD 11 steel with various oxidation temperature were investigated. SKD 11 steels were manufactured by using vacuum furnace and solutionized for 1 hr at $1,050^{\circ}C$. Steel surface was ion nitrided at $500^{\circ}C$ for 1 hr and 5 hr by ion nitriding equipment. ion nitrided specimen were investigated by SEM, OM and hardness tester. Oxidation was carried out by using muffle furnace in air at $500^{\circ}C,\;700^{\circ}C\;and\;900^{\circ}C$ for 1hr, respectively. Oxidation behavior of the ion nitrided specimen was investigated by SEM, EDX and surface roughness tester. The conclusions of this study are as follows: It was found that plasma nitriding for 5 hr at $500^{\circ}C$, compared with ion nitriding for 1 hr at $500^{\circ}C$, had a thick nitrided layer and produced a layer with good wear, corrosion resistance and hardness as nitriding time increased. Nitrided SKD 11 alloy for 1hr showed that wear resistance and hardness decreased, whereas surface roughness increased, compared with nitrided SKD 11 alloy for 5 hr. The oxidation surface at $900^{\circ}C$ showed a good corrosion resistance.

키워드

참고문헌

  1. F. D. Jones, Die Design and Die Making Practice, Mech. Pub. Co., (1952) 23
  2. J. J. Egan, U.S. Patent 1837256, (1931)
  3. Gas Nitriding, Metal Hand Book, 8th Ed., ASM, Metal Park, OH, 2 (1964) 149
  4. A. S. Korhone, E. H. Sirvio, Thin Solid Films, 96 (1982) 103 https://doi.org/10.1016/0040-6090(82)90218-8
  5. A. Maclahniak, T. Karpinsk, Ind. Heat., April, (1980) 42
  6. J. Kobel, Die Nitroschich tdildung bei der Glimmen tladung, For schungr-bericht des Londas NRW Nr1555, Westdeuscher Verag, Koln/opladen, (1965)
  7. H. C. Choe, K. Y. Hwang, K. H. Kim, J. Japan Inst. Metals, 64 (2000) 79 https://doi.org/10.2320/jinstmet1952.64.2_79
  8. U. B. Byon, G H. Lee, K. S. Nam, C. K. Won, J. K. Inst. Met. Mat., 30 (1992) 375
  9. R. Hugon, G Henrion, M. Fabry, Surface and Coating Technology, 59 (1993) 82 https://doi.org/10.1016/0257-8972(93)90058-V
  10. M. Ohring, The Materials Science of Thin Films, 110, Academic Press INC., America. San diago, (1992)
  11. Z. L. Zhang, T. Bell, Surface Engineeing, 1 (1985) 131 https://doi.org/10.1179/sur.1985.1.2.131
  12. G. C. Wood, Corrosion Sci., 2 (1962) 173 https://doi.org/10.1016/0010-938X(62)90019-7
  13. E. A. Gulbransen, K. F. Andrew, F. A. Brassart, J. Electrochem, Soc., 102 (1955) 16 https://doi.org/10.1149/1.2429980
  14. S. S. Brenner, J. Electrochem. Soc., 102 (1955) 16 https://doi.org/10.1149/1.2429980
  15. A. U. Seybolt, Trans. Metall Soc., AIME., 245 (1969)
  16. D. A. Prokoshikin, B. N. Arzamazov, E. V. Ryahchenko, Mikihailov, Pretective Coatings on Metals, 3 (1971) 1
  17. Ogoshi High Speed Universal Weal Machine MANUAL Tokyo Testing Machine MFG, CO., LTD
  18. B. Feignberg, Manufaot. Eng. Manage., 67 (197) 16
  19. Ya. M. Kolotyrkin, 'Passivity of Metals', R. P. Frankenthel and J. Kruger Eds., (1978) 479
  20. A. J. Sedriks, Corros., 42 (1986) 376 https://doi.org/10.5006/1.3584918
  21. S. D. Chyou, H. C. Shin, Carros., 47 (1991) 31 https://doi.org/10.5006/1.3585216
  22. 최한철, 김관휴, 대한금속학회지, 31 (1993) 1052
  23. R. C. Newman, T. Shahrabi, Corros. Sci., 27 (1987) 827 https://doi.org/10.1016/0010-938X(87)90040-0