Predicting cutting forces in face milling with the orthogonal machining theory

  • Kim Kug Wean (Department of Mechanical Engineering, Soonchunhyang University)
  • 발행 : 2005.07.01

초록

This paper presents an effective cutting force model that enables us to predict the instantaneous cutting force in face milling from knowledge of the work material properties and the cutting conditions. The development of the model is based on the orthogonal machining theory with the effective rake angle, which is defined in the plane containing the cutting velocity vector and the chip flow vector. Face milling tests are performed at different feeds and, a fairly good agreement is shown between the predicted cutting forces and the test results.

키워드

참고문헌

  1. Oxley, P.L.B., 'Mechanics of Machining: An Analytical Approach to Assessing Machinability,' Ellis Horwood, Chichester, 1989
  2. Young, H.T., Mathew, P. and Oxley, P.L.B., 'Predicting Cutting Forces in Face Milling,' Int. J. Mach. Tools Manufact., Vol. 34, No. 6, pp. 771-783, 1994 https://doi.org/10.1016/0890-6955(94)90058-2
  3. Stevenson, M.G. and Oxley, P.L.B., 'An experimental Investigation of the Influence of Speed and Scale on the Strain-rate in a Zone of Intense Plastic Deformation,' Proc. Inst. Mech. Eng. Vol. 184, pp. 561-576, 1969-1970 https://doi.org/10.1243/PIME_PROC_1969_184_045_02
  4. Boothroyd, G., 'Temperatures in Orthogonal Metal Cutting,' Proc. Inst. Mech. Eng. Vol. 177, pp. 789-802, 1963 https://doi.org/10.1243/PIME_PROC_1963_177_058_02
  5. Usui, E., 'Analytical Prediction of Three Dimensional Cutting Process,' Trans. ASME J. of Eng. for Ind., Vol. 100, pp. 229-235, 1978 https://doi.org/10.1115/1.3439414
  6. Lee, W.Y., Sin, H.C., 'Force Analysis of Face Milling Process by Shear Flow Stress,' Trans. KSME, Vol. 13, No. 6, pp. 1170-1182, 1989
  7. Stabler, G.V., 'Geometry of Cutting Tools,' Proceedings of the Institution of Mechanical Engineers, London, Vol. 165, pp. 14-26, 1951 https://doi.org/10.1243/PIME_PROC_1951_165_008_02