References
- Vakakis, A. F., Paipetis, S. A., 'The effect of a viscously damped dynamic absorbers on a linear multi-degree-of-freedom system,' Journal of Sound and Vibration 105, pp. 49-60, 1986 https://doi.org/10.1016/0022-460X(86)90219-1
- Sadek, F., Mohraz, B., Taylor, A. W., Chung, R. M., 'A method of estimating the parameters of tuned mass dampers for seismic applications,' Earthquake Engineering and Structural Dynamics 26 pp. 617-635, 1997 https://doi.org/10.1002/(SICI)1096-9845(199706)26:6<617::AID-EQE664>3.0.CO;2-Z
- Zuo, L., Nayfeh, -S. A., 'Minmax optimization of multi-degree-of-freedom tuned-mass dampers,' Journal of Sound and Vibration 272 893-908, 2004 https://doi.org/10.1016/S0022-460X(03)00500-5
- Ball, R. S., 'The Theory of Screws,' Cambridge University Press, 1900
- Dimentberg, F. M., 'The Screw Calculus and its Application in Mechanics,' Foreign Technology Division, Wright-Patterson Air Force Base, Ohio. Document No. FTD-HT_23-1632-67, 1965
- Blanchet, P., Lipkin, H., 'Vibration Centers for Planar Motion,' ASME 1996 Design Engineering Technical Conferences, August 18-22, Irvine, 1996
- Dan, B. J., Choi, Y. J., 'Vibration Analysis via Screw Theory with Application to the Design of Information Storage Device,' Trans. of the KSME(A), Vol. 23, No.2, pp. 155-165, 1999
- Dan, B. J., Choi, Y. J., 'Vibration Stabilization of the Tracking System of an Optical Disc Drive,' Journal of KSPE, Vol. 16, No.1, pp. 191-199, 1999
- Blanchet, P., Lipkin, H., 'A New Design Methodology for Planar Vibration Absorbers,' ASME 1999 Design Engineering Technical Conferences, September 12-16, Las Vegas, DETC'99/VIB-8214, 1999
- Duffy, J., 'Statics and Kinematics with Applications to Robotics,' Cambridge University Press, 1996
- Choi, Y. J., 'Kinematic and Static Analyses of Robots via Screw Theory,' Journal of the KSME, Vol. 31, No.7, pp. 616-625,1991
- Loncaric, J., 'Normal Forms of Stiffness and Compliance Matrices,' IEEE Journal of Robotics and Automation, RA-3, 1987
- Ciblak, N., Lipkin, H., 'Synthesis of Cartesian stiffness for robotic applications,' IEEE Conference Robotics and Automation, May 10-15, 1999, Detroit, Michigan, pp. 2147-2152, 1999 https://doi.org/10.1109/ROBOT.1999.770424
- Huang, S., Shimmels, J. M., 'The bounds and realization of spatial stiffness achieved with simple springs connected in parallel,' IEEE trans. Robotics and Automation, Vol. 14, No.3, pp. 466-475, 1998 https://doi.org/10.1109/70.678455
- Choi, K., Jiang, S., Li, Z., 'Spatial stiffness realization with parallel springs using geometric parameters,' IEEE Trans. Robotics and Automation, Vol. 18, No.3, 2002 https://doi.org/10.1109/TRA.2002.1019458