References
- Agnew, S. R., Vinogradov, A. Y., Hashimoto, S. and Weertman, J. R., 1999, 'Overview of Fatigue Performance of Cu Processed by Severe Plastic Deformation,' J. Electronic Mater., Vol. 28, No. 9, pp. 1038-1044 https://doi.org/10.1007/s11664-999-0181-0
- Berbon P. B., Nikolai, K. T., Valiev, R. Z., Furukawa, M., Horita, Z., Nemoto, M. and Langdon, T. G., 1998, 'Fabrication of Bulk Ultrafine-Grained Materials Through Intense Plastic Straining,' Metal Mat. Trans., Vol. 30A, pp. 1998-2237
- Dugdale, D. S., 1960, 'Yielding of Steel Sheets Containing Slits,' J. Mechanics and Physics of Solid, Vol. 8, pp. 100-104 https://doi.org/10.1016/0022-5096(60)90013-2
- Friedrich, H. and Schumann, S., 2001, 'Research for a New Age of Magnesium in the Automotive Industry,' J. Mat. Processing Tech., Vol. 117, pp. 276-281 https://doi.org/10.1016/S0924-0136(01)00780-4
- Iwahashi, Y., Horita, Z., Nemoto, M. and Langdon, T.G, 1998, 'The Process of Grain Refinement in Equal-Channel Angular Pressing,' Acta Mater., Vol. 46, pp. 3317-3331 https://doi.org/10.1016/S1359-6454(97)00494-1
- Kim, H. K., Choi, M. I., Chung, C. S. and Shin, D. H., 2002, 'Fatigue Crack Growth Behavior in Ultrafine Grained Low Carbon Steel,' KSME Int. J., Vol. 16, No. 10, pp. 1246-1252
- Kim, W. J., An, C. W., Kim, Y. S. and Hong, S. I., 2002, 'Mechanical Properties and Microstructures of an AZ61 Mg Alloy Produced by Equal Channel Angular Pressing,' Scripta Mater., Vol. 47, pp. 39-44 https://doi.org/10.1016/S1359-6462(02)00094-5
- Patlan, V., Vinogradov, A., Higashi, K. and Kitagawa, K., 2001, 'Overview of Fatigue Properties of Fine Grain 5056 Al-Mg Alloy Processed by Equal-Channel Angular Pressing,' Mater. Sci. & Eng., Vol. A300, pp.171-182 https://doi.org/10.1016/S0921-5093(00)01682-8
- Rabinovich, M. K. H. and Markushev M. V., 1995, 'Influence of Fine Grained Structure and Superplastic Deformation on the Strength of Aluminum Alloys,' J. Mater. Sci., Vol. 30, pp. 4692-4702 https://doi.org/10.1007/BF01153080
- Suresh, S. and Ritchie, R. O., 1984, 'Propagation of Short Fatigue Cracks,' Int. Metal Rev., Vol. 29, pp. 445-476
- Vinogradov, A., Nagasaki, S., Parian, V., Kitagawa, K. and Kawazoe, N., 1999, 'Fatigue Properties of Fine Grain 5056 Al-Mg Alloy Processed by Equal-Channel Angular Pressing,' NanoStructured Mater., Vol. 11, pp. 925-934 https://doi.org/10.1016/S0965-9773(99)00392-X
- Iwahashi, Y., Furukawa, M., Horita, Z., Nemoto, M. and Langdon, T. G., 1998, 'Microstructural Characteristics of Ultrafine-Grained Aluminum Processed Using Equal-Channel Angular Pressing,' Metal Mat. Trans., Vol. 29A, pp. 2245-2252 https://doi.org/10.1007/s11661-998-0102-5