동력조향장치 호스 조립품의 이탈력 추정에 관한 연구

A Study on the Estimation of Separation Forces of a Power Steering Hose Assembly

  • Kim Hyungje (Graduate School, Pukyong National University) ;
  • Kim Byungtak (School of Mechanical Engineering, Pukyong National University) ;
  • Yoon Moonchul (School of Mechanical Engineering, Pukyong National University)
  • 발행 : 2005.07.01

초록

The power steering hose assembly is usually manufactured through the swaging process, which is conducted to connect a hose with metal fittings. In this process the hose is inserted into metal components, the sleeve and the nipple, and compressed in the radial direction by the jaws to clamp the hose with metal components. In case that the clamping force is small, the oil in the hose can leak locally under the severe operating conditions. To confirm the clamping force requirements, the measurement of separation force in longitudinal direction of the hose is usually performed. In this study, the swaging process of a hose is simulated with the finite element method, to investigate the effect of friction coefficient on the separation fDrce. The results interpretations are ffcused on the inner rubber component, and also a formula is proposed to estimate the separation farces with respect to friction coefficients.

키워드

참고문헌

  1. A. Piela, 'Analysis of the Metal Flow in Swaging-Numerical Modelling and Experimental Verification,' Int. J. Mech. Sci., Vol.39, No.2, pp.221-231, 1997 https://doi.org/10.1016/0020-7403(96)00056-2
  2. L. A. Goettler, R. I. Leib and A. J. Lambright, 'Short Fiber Reinforced Hose - A New Concept in Production and Performance,' Rubber Chemistry and Technology, Vol.52, No.4, pp.838-863, 1979 https://doi.org/10.5254/1.3535245
  3. M. E. Nichols and R. A. Pett, 'Predicting the Life of Automotive Power Steering Hose Materials,' Rubber World, Vol.211, No.6, pp.27-31, 1995
  4. Hydraulic Hose and Hose Fitting Subcommittee, 'Wire Braid Angle Response Characteristics in Hydraulic Hose,' SAE Transaction 972706, Vol.22, pp.107-126, 1997
  5. R. H. Fineey, 'Application of Finite Element Analysis,' Elastmerices, Vol.119, No.1, pp.18-23, 1987
  6. S. Nair and A. Dollar, 'Stresses and Strains in High-Pressure Composite Hoses,' J. of Pressure Vessel Technology, Vol.119, pp.351-355, 1997 https://doi.org/10.1115/1.2842315
  7. M. Kuipers, M. van der Veen, 'On Stresses in Reinforced High-Pressure Hose,' Acta Mechanica, Vol.80, No.3, pp.313-322, 1989 https://doi.org/10.1007/BF01176167
  8. P. C. Bregman, M. Kuipers, H. L. J. Teerling and W. A. van der Veen, 'Strength and Stiffness of a Flexible High- Pressure Spiral Hose,' Acta Mechanica, Vol.97, No.3, pp.185-204, 1993 https://doi.org/10.1007/BF01176525
  9. H. J. Kim and B. T. Kim, 'Effect of the Friction on the Mechanical Behavior of a PIS Hose in Swaging,' Autumn Conference Proceeding, KSAE, Vol. II , pp.1016-1022, 2001
  10. M. A. Crisfield, Non-linear Finite Element Analysis of Solids and Structures, Vol.2, pp. 62-71, John Wiley and Sons, New York, 1997
  11. K. J. Bathe, Finite Element Procedures in Engineering Analysis, pp.335-345, Prentice-Hall, New Jersey, 1982
  12. MSC Software, 'Theory and User Information,' Vol.A, pp.7-30-7-42, MSC, 2001