References
- Mall, S., Fecke, T. and Foringer, M. A., Titanium Matrix Composites: Mechanical Behavior(Ed.. Mall, S. and Nicholas, T.), Technomic publishing, 1998, pp. 1-22
- Partridge, P. G. and Ward-Close, C. M., 'Processing of advanced continuous fibre composites: Current practice and potential developments,' Int. Mater. Reviews, Vol. 38, No. 1, 1993, pp. 1-23
- Bampton, C. C. and Graves, J. A., 'Process modeling for titanium aluminide matrix composites,' Proc. Mat. Res. Soc. Symp., Vol. 273, 1992, pp. 365-376 https://doi.org/10.1557/PROC-273-365
- Nicolaou, P. D., Piehler, H. R. and Kuhni, M. A., 'Fabrication of Ti-6Al-4V matrix, SCS-6 fiber composites by hot pressing using the foil-fiber-foil technique,' Development in Ceramic and Metal-Matrix Composites(Ed. Upadhya, K.), The Minerals, Metals & Materials Society, 1991, pp. 37-47
- Guo, Z. X., 'Towards cost effective manufacturing of Ti/SiC fibre composites and components,' Materials Science and Technology, Vol. 14, 1998, pp. 864-872 https://doi.org/10.1179/026708398790613443
- Derby, B., 'The dependence of grain size on stress during dynamic recrystallisation,' Acta Metall. Mater., Vol. 39, 1991, pp. 955-962 https://doi.org/10.1016/0956-7151(91)90295-C
- Paton, N. E. and Hamilton, C. H., 'Microstructural influence on superplasticity in Ti-6Al-4V,' Met. Trans., Vol. 10A, 1979, pp. 241-250
- Baudelet, B. and Suery, M., 'Plastic stability and strain to fracture during superplastic deformation,' Superplasticity and Superplastic Forming (Ed. Hamilton, C.H and Paton, N.E.), Proc. Int. Conf., Washington, USA, 1988, pp. 135-148
- Sellars, C. M., 'The physical metallurgy of hot working,' Hot working and forming processes, Sellars, C. M. and Davies, G. J., eds., TMS, London, 1979, pp. 3-15
- 이정서, 박종진, '열간압연 중 발생하는 강판재 내의 재결정 거동 예측,' 한국소성가공학회지, 제7권, 제2호, 1998, pp. 150-156
- Cahn, R. W. and Haasen, P., Physical metallurgy, Vol 3, Elsevier Science B.V., Netherlands, 1996
- Kurzydlowski, J. K. and Ralph, B., The Quantitative Description of the Microstructure of Materials, CRC Press, New York, 1995
- Ding, R., Guo, Z. X. and Wilson, A., 'Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing,' Materials Science and Engineering, Vol. A327, 2002, pp. 233-245
- Porter, D. A. and Easterling, K. E., Phase transformatin in metals, 2nd ed., Champman & Hall, London, 1992
- Polmear, I. J., Light Alloys: Metallurgy or the light metals, 3rd ed., Arnold book co., London, 1995, pp. 175-187
- Gurson, A. L., 'Continuum theory of ductile rupture by void nucleation and growth: part I- yield criteria and flow rules for porous ductile media,' Tran. of the ASME, Vol. 99, No. 1, 1977, pp. 2-15
- Tvergaard, V., 'Influence of voids on shear band instabilities under plane strain conditions,' Int. J. of Fracture, Vol. 17, No.4, 1981, pp. 389-407 https://doi.org/10.1007/BF00036191
- Becker, R., 'The effect of porosity distribution on ductile failure,' J. of Mech. and Phys. of Solids, Vol. 35, No.5, 1986, pp. 577-599
- 김준환, 김태원, 'SiC-Ti 금속기 복합재료의 강화거동에 관한 미시역학적 모델,' 한국복합재료학회지, 제 16권, 제 3호, 2004, pp. 1-8
- Hamilton, C. H., 'Superplastic in titanium alloys,' Proc. Symp. on Superplastic Forming, LA, CA, USA, 1984, pp. 13-49
- Pilling, J. and Ridley, N., Superplasticity in Crystalline Solids, The Institute of Metals, 1989
- Nieh, T. G., Wadsworth, J., and Sherby, O. D., Superplasticity in metals and ceramics, Cambridge University Press, Cambridge, 1997
- 김태원, '항공기용 합금에서 초소성거동 해석을 위한 구성방정식 개발,' 한국항공우주학회지, 제 29권, 제 6호, 2001, pp. 24-33
- Kim, T-W. and Dunne, F. P. E., 'Determination of superplastic constitutive equations and strain rate sensitivities for aerospace alloys,' Proc Instn Mech Engrs, Vol. 211, 1997, pp. 367-380 https://doi.org/10.1243/0954410971532730
- Lemaitre, L. and Chaboche, J-L., Mechanics of solid materials, Cambridge Univ. Press, Cambridge, 1990
- Sellars, C. M., 'Modelling microstructural development during hot rolling,' Materials science and technology, Vol. 6, 1990, pp. 1072-1081 https://doi.org/10.1179/026708390790189966
- 곽우진, 이경종, 권오준, 황상무, '열간단조공정증 강의 재결정거동 유한요소해석,' 한국소성가공학회지, 제5권, 제4호, 1996, pp. 305-319
- Nicolaou, P. D., Piehler, H. R. and Saigal, S., 'Process parameter selection for the consolidation of continuous fiber reinforced composites using finite element simulations,' Int. J. Mech. Sci .. Vol. 37, No.7, 1995, pp. 669-690 https://doi.org/10.1016/0020-7403(94)00092-X
- Zhou, M. and Dunne, F. P. E., 'Mechanisms-based constitutive equations for the superplastic behaviour of a titanium alloy,' J. of Strain Analysis, Vol. 31, 1996, pp. 187-196 https://doi.org/10.1243/03093247V313187