Development of an Interior Permanent Magnet Synchronous Motor and Drive for 42V Electric Air-conditioner System in Vehicles

42V 전동식 에어컨 시스템용 영구자석 매입형 동기 전동기 및 드라이버 개발

  • Published : 2005.06.01

Abstract

In this paper, designs of an Interior Permanent Magnet Synchronous Motor (IPMSM) and its motor driver for 42V automotive air condition system are introduced. The characteristics of the IPMSM are predicted by using d-q equivalent circuit having the parameters, such as current phase angle, d-q axis inductances, core loss resistance, etc. The experimental and analysis results of the prototype are compared to show validity of the analysis method, and to give analyzed characteristics in detail. As the result, an improved IPMSM is designed to widen the operating speed limit of prototype; a cost effective AC drive are considered at the same time.

Keywords

References

  1. 성하경, 허진, 김주한'42V 전동식 에어컨 시스템용 모터 개발', The proceedings of KIEE, vol.52, No. 10, pp. 42-48, 2003
  2. 김종대, 김의봉, '차세대 자동차용 42V 시스템 개발동향', The proceedings of KIEE, vol.52, No. 10, pp. 22-28, 2003
  3. Chang-Chou Hwang, Y.H.Cho, 'Effects of Leakage Flux on Magnetic Field of Interior Permanent Magnet Synchronous Motors', IEEE Transactions on Magnetics, Vol.37, No.4, pp.3021-3024, 2001 https://doi.org/10.1109/20.947055
  4. 武田洋次, 'Design and Control of Interior Permanent Magnet Syncronous Motor(埋?磁石同期モ-タの設計と制御)' First Edition, 2001
  5. Shigeo Morimoto, Masayuki Sanada, and Yoji Takeda, 'Wide-Speed Operation of Interior Permanent Magnet Synchronous Motors with High-Performance Current Regulator', IEEE Transactions on Industry Applications, Vol. 30, No. 4, pp. 920-926, 1994 https://doi.org/10.1109/28.297908
  6. Marco Bilewski, Antonino Fratta, Luigi Giordano, Alfredo Vagati, and Franco Villata, 'ㅊ', IEEE Transactions on Industry Applications, Vol. 29, No.2, pp. 328-337 https://doi.org/10.1109/28.216540
  7. S. Morimoto, Y. Tong, Y. Takeda, and T. Hirasa, 'Loss Minimization Control of Permanent Magnet Synchronous Motor Drives,' IEEE Trans. on Ind. Electron., vol. 41, no. 5, pp. 51-517, Oct. 1994 https://doi.org/10.1109/41.315269
  8. F.B. Fidel, G.C. Aurelio, and F. Roberto, 'Determination of Parameters in Interior Permanent-Magnet Synchronous Motors with Iron Losses without Torque Measurement,' IEEE Trans. on Ind. Appl., vol, 37, no. 5, pp.1265-1272, Sept./Oct. 2001 https://doi.org/10.1109/28.952501
  9. Sheppard J. Salon, 'Finite Element Analysis of Electrical Machines,' Kluwer Academic Publishers
  10. J.J. Lee, Y.K. Kim, H. Nam, K.H. Ha, J.P. Hong, and D.H.Hwang, 'Loss distribution of three phase induction motor fed by pulsewidth modulated inverter' IEEE Trans. on Magn., vol. 40, no.2, pp.762-765, March 2004 https://doi.org/10.1109/TMAG.2004.825445
  11. Gyu-Hong Kang, Jung-Pyo Hong, Gyu-Tak Kim, Jung-Woo Park. 'Improved parameters modelling of Interior Permanent Magnet Synchronous Motor based on Finite Element Analysis', IEEE Trans. on MAGNETICS, vol. 36, no. 4, pp. 1867-1870, July 2000 https://doi.org/10.1109/20.877809
  12. J.Y. Lee, J.P. Hong, and D.H. Kang, 'A Study of Inductance Compu -tations for Transverse Flux Linear Motor Considering Nonlinearity of Magnetic Material, ' Key Engineering Materials, vol. 277-279, pp.391-396, be published 2005 https://doi.org/10.4028/www.scientific.net/KEM.277-279.391
  13. Gapponi, 'Brushless AC Drive Using An Axial Flux Synchronous PM Motor With Low Resolution Position Sensors', 35thAnnual IEEE Power Electronics Specialists Conference, 2004
  14. Texas Instrument, 'Three phase current measurements using a single line resistor on the TMS320F240' App. Note, Literature Number: BPRA077, 1998