초록
폴리머콘크리트는 시멘트 콘크리트에 비해 강도와 내구적 성능 등 여러면에 있어 우수하여 건설현장에서의 벽체용 패널, 통신용 맨흘, 기계설비의 기초, 지하연결박스 등 다양한 용도로 개발되고 사용되어지고 있다. 그러나 폴리머콘크리트는 그 결합재로 쓰이고 있는 수지의 비용이 높아 경제적인 면에서 불리하여 기존 수지를 대체할 수 있는 결합재에 관한 연구가 필요하다. 여기서, PET를 재활용한 폴리머콘크리트는 산업폐기물을 재활용한 것이므로 경제적인 건설 소재가 될 수 있으며, 친환경적인 효과를 가져올 수 있기 때문에 현재 연구가 활발하게 이루어지고, 사용 영역이 확대 될 것으로 전망된다. 하지만 아직까지 PET재활용 폴리머콘크리트의 응력-변형률 거동에 관해서는 기초적인 연구상태에 있다. 따라서, 본 연구에서는 폐 PET를 합성한 불포화 폴리에스터 수지를 폴리머콘크리트의 결합재로 이용하여 콘크리트를 제조하였으며, 수지량, 골재의 최대치수, 양생방법에 변화를 주었다. 그리고 변위제어가 가능한 M.T.S 장비를 사용하여 응력-변형률 곡선을 관찰하였다. 그 결과 PET 재활용 폴리머콘크리트의 압축강도는 수지의 함량, 굵은골재의 크기변화, 양생방법에 모두 영향을 받는 것으로 나타났다. 탄성계수의 변화는 수지의 함량이 크게 좌우하였으며, 굵은골재의 최대치수와 양생방법에서 크게 영향을 받지 않았다. 최대응력에서의 변형률은 수지의 함량과 굵은골재의 최대치수에 영향을 많이 받는 것으로 나타났다.
The use of Polymer Concrete (PC) is growing very rapidly in many structural and construction applications such as box culverts, hazardous waste containers, trench lines, floor drains and the repair and overlay of damaged cement concrete surfaces in pavements, bridges, etc. However, PC has a defect economically because resin which be used for binder is expensive. Therefore the latest research is being progressed to replace existing resin with new resin which can reduce the high cost. Here, Polymer concrete using the recycled PET(polyethylene terephthalate) has some merits such as decrease of environmental destruction, decrease of environmental pollution and development of new construction materials. The variables of this study are amount of resin, curing condition and maximum size of coarse aggregate to find out mechanic properties of this. Stress-strain curve was obtained using MTS equipment by strain control. The results indicated that modulus of elasticity was increased gradually in an ascending branch of curve, as an increase of resin content. Compressive strength was the highest for resin content of $13\%$. And Compressive strength was increased as maximum size of coarse aggregate increases. The strain at maximum stress increases with an increase of resin content and size of coarse aggregate. For the descending branch of stress-strain curve the brittle fracture was decreased when it was cured at the room temperature compared to high temperature.