DOI QR코드

DOI QR Code

Fabrication of vertical Hall sensor for detecting three phases magnetic field

3상의 자계 검출을 위한 수직 Hall 센서의 제작

  • Lee, Ji-Yeon (School of Electrical Engineering and Computer Science, Yeungnam University) ;
  • Nam, Tae-Chul (School of Electrical Engineering and Computer Science, Yeungnam University)
  • 이지연 (영남대학교 전자정보공학부) ;
  • 남태철 (영남대학교 전자정보공학부)
  • Published : 2005.03.30

Abstract

In this study, we have fabricated a three branches vertical Hall sensor for detecting three phases rotation informations of miniaturized brushless motor. The sensor gives three position signals phase shifted by $120^{\circ}$, corresponding to the motor driving signals. The branch has one Hall output and one input each other. The central part acts as common driving input. Sensor has branch width of $150{\mu}m$ and distance from central electrode to Hall electrode of $100{\mu}m$. The sensitivity of sensor is 250 V/$A{\cdot}T$ at magnetic field of 0.1 T. It has also showed three sine waves of Hall voltages with $120^{\circ}$ phase over a $360^{\circ}$ rotation. A packaged sensing part are $2{\times}2mm^{2}$ and has been successfully tested on a motor rotation at a speed up to 60,000 rpm.

Keywords

References

  1. H. P. Baltes and R. S. Popovic, 'Integrated semiconductor magnetic field sensors', Proc. IEEE, vol. 74, pp. 1107-1132, 1986
  2. T. Nakamura and K. Maenaka, 'Integrated magnetic sensors', Sensors and Actuators, vol. A22, pp. 762-769, 1990
  3. James E. Lenz, 'A review of magnetic sensors', Proc. of the IEEE, vol. 78, no. 6, June 1990
  4. K. Mohri, T. Uchiyama, and L. Panina, 'Recent advances of micro magnetic sensors and sensing application', Sensors and Actuators, vol. A59, pp. 1-8, 1997
  5. R. S. Popovic, J. A. Flanagan, and P. A. Besse, 'The future of magnetic sensors', Sensors and Actuators, vol. A56, pp. 39-55, 1996
  6. R. S. Popovic, 'Hall effect devices', in:B. E. Jones(Ed.), Adam Hilger, New York, 1991
  7. M. Paranjape, I. Filanovsky, and L. J. Ristic, 'A 3-D vertical Hall magnetic-field sensor in CMOS technology', Sensors and Actuators, vol. A34, pp. 9-14, 1992
  8. M. Paranjape, L. M. Landsberger, and M. Kahrizi, 'A CMOS-compatible 2-D vertical Hall magnetic-field sensor using active carrier confinement and post-process micromachining', Sensors and Actuators, vol. A53, pp. 278-283, 1992
  9. F Burger, P.-A. Besse, and R. S. Popovic, 'New fully integrated 3-D silicon Hall sensor for precise angular-position measurements', Sensors and Actuators, vol. A67, pp. 72-76, 1998
  10. F. Burger, P.-A .Besse, and R. S. Popovic, 'New single chip Hall sensor for three phases brushless motor control', Sensors and Actuators, vol. 81, pp. 320-323, 2000 https://doi.org/10.1016/S0924-4247(99)00101-6
  11. E. Schurig, M. Demierre, C. Schott, and R. S. Popovic, 'A vertical Hall device in CMOS high-voltage technology', Sensors and Actuators, vol. A97-98, pp. 47-53, 2002
  12. 정우철, 남태철, 'TMAH에 의한 이방성 식각을 이용한 3차원 자기센서의 제작', 센서학회지, 제8권, 제4호, pp. 308-313, 1999
  13. 최채형, 이지연, 정우철, 김미목, 남태철, '이방성 식각 및 Ni/Fe 박막을 이용한 3차원 홀 센서의 감도개선', 한국센서학회 종합학술대회 논문집, 제10권, 제1호, 1999
  14. C. Schott, 'High accuracy analog Hall probe', IEEE Trans. Instr. Meas. vol. 46, no. 2, pp. 613-616, 1996 https://doi.org/10.1109/19.571937
  15. Hubert Blanchard, Christina de Raad Iseli, and R. S. Popovic, 'Compensation of the temperature-dependent offset drift of Hall sensor', Sensors and Actuators, vol. A60, pp. 10-13, 1997
  16. Ed Ramsden, 'Hall effect sensors: Theory & Application', Advanstar Communications Inc., 2001