유기물자원화 (Journal of the Korea Organic Resources Recycling Association)
- 제12권4호
- /
- Pages.95-104
- /
- 2004
- /
- 1225-6498(pISSN)
- /
- 2508-3015(eISSN)
열압 성형법에 의한 폐목재-플라스틱 복합패널의 기초적 성질
Basic Properties of Waste Wood-Plastic Composite Panels by Hot Press Molding Method
- Choi, Nak-Woon (Samsung Fine Chemicals) ;
- Mun, Kyoung-Ju (Chonbuk National University) ;
- Choi, San-Ho (Howon University)
- 투고 : 2004.10.01
- 심사 : 2004.12.03
- 발행 : 2004.12.30
초록
본 연구에서는 가연성 건설폐기물 재활용의 일환으로, 폐발포폴리스티렌의 스티렌 용액에 가교제 및 개시제를 첨가하여 제조한 결합재와, 폐목재 칩을 이용하여, 폐목재-플라스틱 복합패널을 제조하였다. 전열 프레스를 이용하여 다양한 결합재량 및 충전재-결합재 비를 갖는 복합패널 공시체를 제조하였으며, 그 겉보기 밀도, 흡수율, 흡수에 의한 팽창률, 휨강도, 내수성 등에 관한 일련의 실험을 행하였다. 폐목재-플라스틱 복합패널의 겉보기밀도는 결합재량 및 충전재-결합재비의 증가에 따라 증대하며, 그 휨강도 및 습윤 휨강도는, 결합재량 35%, 충전재-결합재비 0.8에 있어서 최대치에 이른다. 흡수율 및 흡수에 의한 두께 팽창률은, 결합재량 및 충전재-결합재비의 증가에 따라 현저하게 감소한다. 결합재량 30%이상의 경우, 충전재-결합재비에 관계없이, 복합패널의 24h 상온 수중(
A styrene solution of waste expanded polystyrene with a crosslinking agent and an initiator was used as a binder for waste wood-plastic composite panels. The waste wood-plastic composite panels are prepared with various binder contents and filler-binder ratios by using a hot press molding method. The apparent density of the composite panels is increased with increasing binder content and filler-binder ratio, while their water absorption and expansion in thickness are decreased with increasing binder content and filler-binder ratio. The maximum flexural strength and wet flexural strength of the composite panels are obtained at a binder content of 35% and a filler-binder ratio of 0.8. Decreases in the flexural strengths of the composite panels due to water immersion at 20 and
키워드