참고문헌
- Albrektsson T, Branemark PI, Hansson HA, Lindstrom J. Osseointegrated titanium implants. Acta Othop Scand 1981:pp155-70
- Richard LB, Richard BJ, Toby K. Tightening characteristics for screwed joints in os-seointegrated dental implants. J Prosthet Dent 1994:71 :592-529
- McGlumpy EA, Elfers CL, Mendel DA. Optimum torque values for implant abutment screws. J Dent Res 1993:72:191-3
- Samandi M, Shedden BA, Bell T, Collins GA, Hutching SR, Tendy SJ. Significance of nitrogen mass transfer mechanism on the nitriding behavior of austenitic stainless steel, J. Vac. Sci. Technol 1994:B12:935-9.
- Larry CB, Donna LD, Eric WN, James, DT. Torque required to loosen single-tooth implant abutment screw before and after simulated function. Int J Prosthodont 1993: 6:435-9
- Kim H, Johnson JW. Corrosion of stainless steel. nickel-titanium, coated nickel titanium, and titanium orthodontic wires. Angle Orthod 1999:69:39-44
- Will CM, Ronald DW. Barbara HM, Amp WM. Implant abutment screw rotations and preloads for four different screw materials and surface. J Prosthet Dent 2001:86:24-32
- Charles JG, Joseph YKK, Kitichai R. Clinical complications of osseointegrated implants. J Prosthet Dent 1999:81:537-52
- Miller RB, McGlumpy EA, Kerby RE. Comparison of abutment screw preload in different implant designs. J Dent Res 1994:73:No.807 (IADR Abstracts)
- Motosch N. Development of design charts for bolts preloaded up to the plastic range. J Eng Ind 1976:98:849-51
- Burguette RL. John RB, King T, Patterson EA. Tightening characteristic for screwed joint in osseointegrated dental implant. J Prosthet Dent 1994:71:592-5
- Gil FJ, Solano E. Campos A. Bocci F. Saez I. Alfonso MV. Planell JA. Improvement of the friction behavior of NiTi orthodontic archwires by nitrogen diffusion. Biomed Mater Eng 1988:8:335-42
- Cui FZ, Luo ZS. Feng QL. Hgihlyadhesive hydroxyapatite coatings on titanium alloy formed by ion beam assited depostion, J. Mater. Sci.tMater. Med., 1997:8:403-5
- Motosch N. Development of design charts for bolts preloaded up to the plastic range. J Eng Ind 1976:98:849-51
- Berghaus B. German Patent DRP 1932:639
- Keating K. Connecting abutments to dental implants. Irish Dentistry 2001:July:43-6
- Haack JE. Sakaguchi RL. Sun T. Coffey JP. Determination of preload stress in dental implant screws. .I Dent Res 1994: 73:No.808 (IADR Abstracts)
- Shin JR. Lee KH. Metals as Biomaterials. Biomaterials Research 1999:3:28-38
- Santhanam AT. US Patent 5. pp.257-367. 1993.20.Eckert S E. Wollan P C. Retrpspective review of 1170 endosseous implants placed in partially edentulous jaws. J Prosthet Dent 1998: 79:415-21
- Yoshinari M. Ozeki K. Sumil T. Properties of hydroxyapatite-coated Ti-6AI-4V al-loy produced ion plating methode. Bull. Tokyo. Dent. cen.. 1991:32: 147-56
- Perry AJ. Jagner M. Sproul WD, Rudnik PJ. The residual stress in TiN films deposited onto cemented carbide by high-rate reactive sputtering, Surf. Coat. Technol. 1989:39:387-95 https://doi.org/10.1016/0257-8972(89)90071-6
- Martin WC. Woody RD. Miller BH. Miller AW. Implant abutment screw rotations and preloads for four different screw materials and surfaces. J Prosthet Dent 2001:86:24-32
- Zhang ZL. Bell T. Surface Engineering 1985: 1: 131-6
- Koak JY. Reo SJ. Chang IT. Yim SH. Lee JY. Lee KR. The study on the removal torque of the diamond like carbon coated titanium abutment screws. J. Korean Acad Prothodont 2003:41: 128-35
- Calister WD. Materials Science and Engineering An Introduction. 5th. Edition. Jhon Willey & Sons. Inc. New York. 2000. pp. 30-59
- Thornton JA. Penfold AS. Thin Film Processes. edited by Vossen JL and Kern W. Academic Press 1978. pp.75-118
- Porter SS. Robb TT. Increasing implant-abutment preload by thin-gold coating abutment screws. J Dent Res 1998: n:No.837 (IADR Abstracts)
- William JD. Dental Materials and their selection. 2nd Edition. Quintessence Publishing Co. Inc. Chicago. 1997, pp. 16-7
- Jemt T. Lacey WR. Harris D. et al. Osseointegrated implants for single tooth replacement: A 1-year report from a multicenter prospective study. Int J Oral Maxillofac Impl 1991:6:29-36
- Binon PP. Implants and components: Entering the new millennium. Int J Oral Maxillofac Impl 2000:15:76-94