소성∙가공 (Transactions of Materials Processing)

  • 제13권6호
  • /
  • Pages.535-539
  • /
  • 2004
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

비탄성 변형 이론을 바탕으로 한 Mg-Al 합금의 슬립기구 천이 현상 해석

Effect of Slip System Transition on the Deformation Behavior of Mg-Al Alloy: Internal Variable Based Approach

  • 이현석 (포항공과대학교 신소재공학과) ;
  • 장영원 (포항공과대학교 신소재공학과) ;
  • 방원규 (포항산업과학연구원)
  • 발행 : 2004.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Although magnesium has high potential for structural material due to the lightweight and high specific strength, the structural application has been limited by the low ductility at room temperature. The reason of the poor ductility is few activated slip systems of magnesium (HCP structure) during deformation. As temperature increases, however, additional non-basal slip systems are incorporated to exhibit higher ductility comparable to aluminum. In the present study, a series of tensile tests of Mg-Al alloy has been carried out to study deformation behavior with temperature variation. Analysis of load relaxation test results based on internal variable approach gave information about relationship between the micromechanical character and corresponding deformation behavior of magnesium. Especially, the material parameter, p representing dislocation permeability through barriers was altered from 0.1 to 0.15 as the non-basal slip systems were activated at high temperature.

키워드

참고문헌

  1. P. Juchmann, S. Wolff, 2002, 'Magnesium Sheet Co- mponents for Ultra-light Construction', Proc. of 59th Annual World Mg Conference, pp. 49-54
  2. W . J . Kim, S. W. Chung, 2000, 'Superplasticity in Fine-grained AZ61 Magnesium Alloy', Metals & Mat. Int., Vol. 6., pp. 255-259 https://doi.org/10.1007/BF03028220
  3. E. F. Emley, 1966, 'Principles of Magnesium Technology', Pergamon Pres
  4. N. Ono, R. Nowak, S.Miura, 2003, 'Effect of defor-mation temperature on Hall-Petch relationship Regist -ered for polycrystalline magnesiu, Mater. Letter, Vol. 58, pp. 39-43
  5. Zuzanka Trojanov$\`{a}$, Zdenek Drozd, Pavel Luk$\`{a}$e, Kristi?n M$\`{a}$this, Hans Ferkel and Werner Riehemann, 2000, 'Thermally activated processes in microcryst-alline Mg', Scripta mater, Vol. 42, pp. 1095-1100 https://doi.org/10.1016/S1359-6462(00)00342-0
  6. J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama and K. Higashi, 2003, 'The activity of non-basal slip systems and dynamic recoveryat room temperature in fine-grained AZ31B magnesium alloys', Vol. 51, pp. 2005-2065
  7. M. H. Yoo, S. R. Agnew, J. R. Morris and K. M. Ho, 2001, 'Non-basal slip systems in HCP metals and alloys: source mechanisms', Mater. Sci. Eng. A, 319-321, pp. 87-92 https://doi.org/10.1016/S0921-5093(01)01027-9
  8. S. R. Agnew, M. H. Yoo and C. N. Tom?, 2001, 'Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y', Acta mater, Vol. 49, pp. 4277- 4289 https://doi.org/10.1016/S1359-6454(01)00297-X
  9. T. Obara, H. Yoshinga and S. Morozumi, 1973, '{11-22}<-1-123> Slip system in magnesium', Acta metal., Vol. 21, pp. 845-853 https://doi.org/10.1016/0001-6160(73)90141-7
  10. E. W. Hart, 1967, 'Theory of the tensile test', acta metal. Vol. 15, pp. 351-355 https://doi.org/10.1016/0001-6160(67)90211-8
  11. 권용남, 이영선, 유봉선, 이정환, 2003, 'AZ 31 판재의 고온 부풀림 성형', Proc. of 17th con-ference on mechanical behavior of materials, Pogang, Korea, pp. 261-268
  12. Y. W. Chang and E. C. Aifantis, 1987, 'Constitutive Laws for Engineering Materials', Elservior Science Publishing Co
  13. 하태권, 1996, '내부 변형 변수를 이용한 PbSn 공정 합금의 초소성 변형특성 연구', 포항공대 박사학위논문

피인용 문헌

  1. An internal variable approach of orientation dependent deformation mechanism of rolled AZ31 magnesium alloy vol.17, pp.5, 2011, https://doi.org/10.1007/s12540-011-1004-4