한국응용과학기술학회지 (Journal of the Korean Applied Science and Technology)

  • 제21권4호
  • /
  • Pages.306-312
  • /
  • 2004
  • /
  • 1225-9098(pISSN)
  • /
  • 2288-1069(eISSN)
한국응용과학기술학회 (The Korean Society of Applied Science and Technology)
권호 표지
DOI QR코드

DOI QR Code

알루미늄용 산성세정제의 제조 및 세정효과

Preparation and Effects of Acidic Cleaning Agents; for Aluminum

  • 심일우 (명지대학교 공과대학 화학공학과) ;
  • 조혜진 (명지대학교 공과대학 화학공학과) ;
  • 유혁제 (명지대학교 공과대학 화학공학과) ;
  • 우종표 (명지대학교 공과대학 화학공학과) ;
  • 김명수 (명지대학교 공과대학 화학공학과) ;
  • 함현식 (명지대학교 공과대학 화학공학과) ;
  • 박홍수 (명지대학교 공과대학 화학공학과) ;
  • 백운필 (명지대학교 이과대학 화학과)
  • Shim, Il-Woo (Department of Chemical Engineering, Myongji University) ;
  • Jo, Hye-Jin (Department of Chemical Engineering, Myongji University) ;
  • You, Hyuk-Jae (Department of Chemical Engineering, Myongji University) ;
  • Wu, Jong-Pyo (Department of Chemical Engineering, Myongji University) ;
  • Kim, Myung-Soo (Department of Chemical Engineering, Myongji University) ;
  • Hahm, Hyun-Sik (Department of Chemical Engineering, Myongji University) ;
  • Park, Hong-Soo (Department of Chemical Engineering, Myongji University) ;
  • Baik, Woon-Phil (Department of Chemistry, Myongji University)
  • 발행 : 2004.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An acid cleaning agent (AACA) for aluminum was prepared by blending of sorbitol, n-octanoic acid, MJU-100A, Tetronix T-701, PPA-23, C8-83 and phosphoric acid. With the prepared AACA, degreasing, foam height, etching and derusting tests were carried out. As a result, AACA-4 and AACA-7 showed better cleaning ability than commercial acid cleaning agents.

키워드

참고문헌

  1. F. Mamiya, 'The Technology of Metal Cleaning', Maki-Shoten, Tokyo (1971)
  2. Jpn. Oil and Fats Co., 'Surfactant Handbook', pp. 430-433, Kogaku Tosho Co., Tokyo (1987)
  3. H. Ishikawa, T. Abe, T. Takahashi, and T. Kikuchi, Jpn. Patent 04173989A2 (1992)
  4. V. N. Osipov and N. I. Isaev, Effectiveness of Corrosion Inhibitors, Prot. Met, 25, 671 (1990)
  5. E. K. Park, H. S. Park, and Y. K. Kim, A Study on the Preparation of Solvent Type Low Foaming Scouring Agents, J. Kor. Ind Eng. Ozem., 4, 358 (1993)
  6. J. C. Harris, R. E. Kamp, and W. H. Yanko, Detection of Soil Removal in Metal Cleaning by the Radioactive Tracer Technique, J. Electro. Ozem Soc., 97, 730 (1950)
  7. A. Pinazo, L. Perez, M. R. Infante, and E. I. Franses, Relation of Foam Stability to Solution and Surface Properties of Gemini Cationic Surfactants Derived from Arginine, Colloids and Surfaces, 189(1-3), 225 (2001) https://doi.org/10.1016/S0927-7757(01)00595-7
  8. Y. Zhan and G. Liang, Complement of Acidic and Alkaline Degreasing, Diandu Yu Huanbao, 22(2), 29 (2002)
  9. L. A. Zazzera, M. J. Parent, W. M. Lamanna, and S. Kesari, Methods for Polishing and/or Cleaning Copper Interconnects and/or Film and Compositions Therefor, U. S. Patent 112,759A1 (2004)
  10. H. Tahara and O. Tokita, Jpn. Patent 48016464 (1973).11. H. Arita, T. Kaneko, N. Nagata, K. Nobutaka, A. Konishi, M. Oyano, K. Nagai, and K. Murakami, Jpn. Patent 097389A2 (2002)
  11. T. Matsushita and M. Yukitake, Jpn. Patent 105195A2 (2002)
  12. M. E. Leser and N. Garti, Preface : Polymeric Amphiphiles, Polymers for Advanced Technologies, 12(1-2), 124 (2001)
  13. C. Wu, Development of an In-situ Soil Binding Agent, Waste Management (Oxford), 20m, 527 (2000) https://doi.org/10.1016/S0956-053X(00)00022-2
  14. P. M. Nabar, Wetting and Dispersing Agents for Coatings, Paintindia, 42(7), 31 (1992)
  15. M. Tada, K. Ando, K. Kamio, and Y. Kamata, Jpn. Patent 11043872A2 (1999)
  16. lpn. Oil and Fats Co., 'Surfactant Handbook', p. 176, Kagaku Tosho Co., Tokyo (1987)
  17. J. H. Keun, H. S. Hahm, and H. S. Park, A Study on the Preparation of Alkaline Cleaning Agents for Steel, J. Kor. Oil Chem Soc., 10(2), 35 (1993)