Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)
- Volume 3 Issue 4
- /
- Pages.95-100
- /
- 2004
- /
- 1598-6721(pISSN)
- /
- 2288-0771(eISSN)
A Study on the Filling Imbalance of Polyamide Molding by Taguchi Method
다구찌 방법을 이용한 폴리아미드 성형품의 충전 불균형에 관한 연구
Abstract
Plastics is used to produce precise parts with an inclusion of a reinforcement material such as glass fiber or carbon fiber to improve the dimension accuracy. The plastic goods can be produced with inaccurate dimensions, low mechanical strength, or residual stress due to the over packing of cavity inside, if the filling balance of melt resin is not accomplished. To overcome this problem, it is necessary to design the runner system with the geometrical balance at the mold design stage. However, even if the balanced runner system is achieved, a severe filling imbalance is observed practically in a multi-cavity mold. In this study, experiments were performed with Taguchi method to achieve the filling balance in multi-cavity mold with a symmetric runner system, by the use of pure PA and PA with glass fiber 33%. The experimental results were investigated to understand the effect of related molding factors on the filling imbalance for two resins.
Keywords