한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제14권9호
  • /
  • Pages.903-909
  • /
  • 2004
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

유한요소법을 이용한 냉각홴의 진동 및 간섭에 관한 연구

A Study on Resonance and Interference of a Cooling Fan Assembly by Using FEM

  • 서종휘 (아주대학교 대학원 기계공학과) ;
  • 송하종 (아주대학교 대학원 기계공학과) ;
  • 박태원 (아주대학교 기계공학부) ;
  • 김주용 (동양기전 주식회사) ;
  • 정일호 (아주대학교 대학원 기계공학과)
  • 발행 : 2004.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A CFA(cooling fan assembly) is composed of a fan, motor and shroud, which is at the back of the automotive radiator. By forcing the wind to pass, the CFA controls the cooling performance of the radiator. The noise and vibration of the CFA may be primarily due to the resonance between the CFA and engine. The Interference among the fan, shroud and radiator by deformation is considered when the CFA is designed. In this paper, in order to analyze the structural vibration of the CFA for automobiles, a finite element model of the CFA is established by using a commercial FEM code. After the finite element modeling, the natural frequencies and the mode shapes are obtained from the FE analysis. The natural frequencies are obtained from the vibration test as well. Then, the results of the vibration test are compared with those of the FE analysis. The natural frequencies obtained by experiment have a great similarity to the results from FE model. We have confirmed the validity of the FE model and verify the structural safety for the resonance. The stress and displacements are obtained from FE analysis. We have confirmed the safety for the interference and failure.

키워드

참고문헌

  1. 정석윤 등, 2002, '자동차용 쿨링홴의 유동 및 소음 특성 해석,' 한국자동차공학회, 춘계학술대회논문집, pp. 1379-1384
  2. 이규상, 정석윤, 김경훈, 윤천한, 최희석, 2002, '자동차용 냉각홴의 성능 실험과 특성 해석,' 한국자동차공학회, 추계학술대회논문집, pp. 517~522
  3. Shimada, k., Hagiwara, H. and Hsumi, K., 2000, 'Study of radiator cooling fan for Motor- cycles,' JSAE Review 21, pp. 385-416 https://doi.org/10.1016/S0389-4304(00)00041-2
  4. Morris, S.C., Good, J.J. and Foss, J.F., 1998, 'Velocity measurements in the wake of an auto- motive cooling fan,' Experimental Thermal and Fluid Science 17, pp. 100-106 https://doi.org/10.1016/S0894-1777(97)10054-1
  5. Shimada, K., Kimura, K. and Watanabe, H., 2003, 'A study of radiator cooling fan with labyrinth seal,' JSAE Review 24, pp. 431-439 https://doi.org/10.1016/S0389-4304(03)00076-6
  6. 장서일, 1997, '구조물의 내부공진에 대하여,' 한국소음진동공학회논문집, 제7권, 제1호, pp. 20- 29
  7. 김경영 등, 1997, '특징 형상의 간섭 표현에 대한 연구,' 한국CAD/CAM학회논문집, 제2권, 제3호, pp. 142-149