Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of an Index for the Evaluation of Intake Booming Noise of a Passenger Car

차량의 흡기부밍소음 평가지수 개발

  • 박영원 (아주대학교 시스템공학과) ;
  • 채장범 (아주대학교 기계 및 산업공학부) ;
  • 장한기 (고등기술연구원 제품기술연구센터) ;
  • 이종규 (아주대학교 대학원 시스템공학과)
  • Published : 2004.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, an index for the evaluation of vehicle intake booming noise is developed through a correlation analysis of objective measurement data and subjective evaluation data. First, intake orifice noise is measured at the wide-open test condition. And then, acoustic transfer function between intake orifice noise and interior noise at the steady state condition is estimated. Simultaneously, subjective evaluation was carried out with a ten-scale score by 8 engineers. Next, the correlation analysis between the psycho-acoustic parameters derived from the measured data and the subjective evaluation is performed. The most critical factor was determined and the corresponding index for the intake booming noise is obtained from the multiple factor regression method. At last, the effectiveness of the proposed index is validated.

Keywords

References

  1. 이종규, 박영원, 채장범, 장한기, 2004, '두 음향 탐촉자법과 다구찌방법을 이용한 흡기계의 최적설계에 관한 연구,' 한국소음진동공학회논문집, 제14권, 제2호, pp. 87-94
  2. 이종규, 박영원, 채장범, 장한기, 2003, '강건설계 방법을 이용한 흡기 소음의 성능향상에 대한 연구,' 한국자동차공학회 추계학술대회논문집, pp. 713-719
  3. Weisberg, S., 1985, 'Applied Linear Regress ion' Wiley, New York
  4. 'Zwicker, E., Fastle, H., 1990, Psychoa- coustics-Facts and Models,' Springer-Verlag, Berlin
  5. Hussain, M., Golles J. and Ronacher, A., 1991, 'Statistical Evaluation of an Annnoyance Index for Engine Noise Recordings,' SAE Paper 911080, pp. 359-367
  6. Otto, N., Cheng R. and Wisniewski, E., 1997, 'Linearity of Powertrain Acceleration Sound,' SAE Paper 971982, pp. 887-890
  7. Bispring R., Giehl S. and Vogt, M., 1997, 'A Standardized Scale for the Assessment of Car Interior Sound Quality,' SAE Paper 971976
  8. Otto, N., Eaton C. and Lake, S., 1999, 'Guidelines for Jury Evaluations of Automotives Sounds,' SAE Paper 1999-01-1822
  9. Minitab Inc, 2000, 'Minitab User's Guide #2 : Data Analysis and Quality Tools'
  10. Schiffbanker, H., Brandl, F.W. and Thien, G.E., 1991, 'Development and Application of an Evaluation Technique to Assess the Subjective Character of Engine Noise,' SAE Paper 911081, pp. 369-379
  11. Hashimoto, T., 1997, 'Modification of Roughness Level for Higher Correlation with Unpleasantness-Weighted Roughness Level due to Modulation Frequencies,' JSAE Paper 9735132
  12. 이종규, 박영원, 채장범, 장한기, 2004, '급가속 주행시 차량의 실내소음에 대한 음질지수 개발,' 한국자동차공학회 춘계학술대회논문집, pp. 1225- 1230
  13. 장한기, 국두윤, 이종규, 최준호, 2001, '지게차의 출발감각 평가지수 개발,' 한국소음진동공학회 춘계학술대회논문집, pp. 1094-1099
  14. 이상권, 채희창, 박동철, 정승균, 2003, '신경망회로를 이용한 부밍음질의 인덱스 개발에 관한 연구,' 한국소음진동공학회논문집, 제13권, 제6호, pp. 445-451