과제정보
본 논문은 한화종합화학(주)의 연구비 지원에 의해서 수행된 과제임
본 과제는 Spruce재가 사우나와 같은 고온 공간용 부재(部材)로 사용되어질 때 나타나는 수지삼출의 문제점을 해결하여 그 방안을 제시코저 수행하였다. 건식(乾式)공간용 부재(部材)의 경우 적절한 열기건조가 이루어진다면 별도의 처리를 실시하지 않더라도 110℃의 수지삼출 안정선을 얻을 수 있는 것으로 확인되었으며, 고주파진공건조에 의해 수지삼출 안정선이 열기건조보다 약 20℃ 정도 더 상승하였다. 습식(濕式)폭로시험에서는 저압증기폭쇄처리재의 경우 열기건조재나 고주파진공건조재 모두 수지가 전혀 삼출되지 않은 반면에, 무처리재의 경우 건조방법에 관계없이 130℃ 이상의 폭로조건에서는 수지삼출의 정도가 건식(乾式)폭로시험의 경우보다 심한 것으로 나타나, 수지삼출을 예방하기 위하여 인공건조중 저(低)함수율 상태의 건조말기에 고온(高溫)을 적용하여 건조하는 것보다는 건조전 고(高)함수율 상태에서 과열(過熱)증기로 분무(噴霧)처리하는 것이 더 바람직한 것으로 확인되었다.
This study was carried out to find the efficient methods for preventing resin exudation from spruce board during high temperature environment service.In the dry-air oven test, in-use temperature related to resin exudation of 110℃ could be obtained by the appropriate kiln drying without any special treatment, and the in-use temperature of the radio-frequency/vacuum (RF/V)-dried boards was about 20℃ higher than that of the conventional kiln-dried boards.In the autoclave test, resin exudation was not found from any board dried in the conventional kiln and in the RF/V kiln after the low pressure steam explosion (SE) treating, while for the control resin exudations were more severe in the autoclave test above 130℃ than in the dry-air oven test. It, therefore, would be suggested that resin exudation during high temperature service condition can be prevented more effectively by super-heated steaming green boards than by high-temperature drying boards with low moisture.
본 논문은 한화종합화학(주)의 연구비 지원에 의해서 수행된 과제임