Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지

A Study on the Fatigue Strength of Highly Skewed Propeller

하이 스큐드 프로펠러의 피로강도에 관한 연구

  • 강낙훈 (SH공사 집단에너지사업단) ;
  • 김종호 (한국해양대학교 기관시스템공학부)
  • Published : 2004.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently there has been a remarkable increase in the number of high speed and large ships and the high power involved for propulsion of above ships has brought high pitch ratio and highly skewed propeller. The recent tendency toward highly skewed propeller has increased the load on propeller blades, and the fatigue strength of propeller blades has become the critical point in design of propellers for ships. In this paper the effect of stress ratio and skew angle on the fatigue strength of highly skewed propeller, the statistical inference on the total revolutions of highly skewed propeller for 20 years under normal sea going state. and so on have been discussed. On the basis of above discussions, the highly skewed propeller blade thicknesses by the rules of classification society and the standards of manufacturer in country were compared and reviewed.

Keywords

References

  1. Korean Register of Shipping, Research and Development Center, 'A Review on Rules for Propeller Blade Thickness,' Classification, Korean Register of Shipping, Vol. 28, p. 5, 1994
  2. Bal-Young Kim and Joo-Sung Lee, 'Fatigue Strength Analysis of Marine Propeller Blade to Change in Skew Angle,' Journal of the Society of Naval Architects of Korea, Vol. 35, No. 1, pp. 80-81, 1998
  3. 日本海事協會, 日本海事協會誌-No.234, 日本海事協會, pp. 7-9, 1996
  4. Korean Register of Shipping, Rules for Classification-Part V, Machinery, Korean Register of Shipping, pp. 21-23, 2000
  5. Juno Minakata, 'Propeller Damaged and Repair Techniques at Present,' Journal of the Marine Engineering System, Vol. 33, No. 9, pp. 653-661, 1999
  6. Korean Register of Shipping, Guidances relating to rules for Classification, Part V, Machinery, Section 3. Article 303. Korean Register of Shipping, p. 21, 2000
  7. Nippon Kaiji Kyokai, Rules and Guidance for the survey and construction of steel ships, Part D 7 Propeller, Nippon Kaiji Kyokai, pp. 229-231, 2000
  8. Ichiji Nakano, 'Materials for High Power Marine Propeller' Journal of the Marine Engineering System, Vol. 10, No. 6, pp. 37-46, 1975
  9. The Society of Materials Science, Databook on Fatigue Strength on Metallic Materials, Elsevier Science B.V, Vol. 2, pp. 1568-1570, 1996
  10. Charlie R.Brooks and Ashok Choudhury, Failure Analysis of Engineering Materials, McGraw-Hill, p.334, 2002
  11. 日本機械學會, 統計的據勞勞彈度試驗方法, 日本機械學會, pp. 31-32, 1981
  12. Hirukawa, 'Fatigue Properties of Butt-Welded Joints for 5083-O Aluminium Alloy,' Japanese Society for Mechanical Engineering, Vol. 58, pp. 8-14, 1982
  13. M. Kanao, 'Fatigue Crack Propagation Properties and AKth for Several Structural Steel Plates,' Trans. of NRIM, Japan, Vol. 27, No. 2, pp. 17-24, 1985
  14. Ju-Tae Kim, 'Marine Propeller Blade Strength Analysis by Finite Element Method,' Tech. Hyundai, Vol. 10, No. 3, pp. 8-15, 1990
  15. Bal-Young Kim and Joo-Sung Lee, 'Fatigue Strength Analysis of Marine Propeller Blade to Change in Skew Angle,' Journal of the Society of Naval Architects of Korea, Vol. 35, No. l, pp.80-86, 1998
  16. Nippon Kaiji Kyokai, Rules and Guidance for the survey and construction of steel ships, Part D Machinery installations, Nippon Kaiji Kyokai, pp.28-31, 1996