Quantitative Evaluation of the Impact of Low-Voltage Loads Due to the Successive Voltage Sags

연속적인 순간전압강하에 의한 저압 부하의 정량적 영향 평가

  • 문종필 (기초과학연구원 전력시스템연구실) ;
  • 김재철 (숭실대 공대 전기제어시스템공학부) ;
  • 윤상윤 (LG산전 전력연구소) ;
  • 강봉석 (숭실대 공대 전기제어시스템공학부)
  • Published : 2004.12.01

Abstract

Automatic reclosing is a typical protection method in power distribution systems for clearing the temporary faults. However, it has a fatal weakness in regards to voltage sags because it produces successive voltage sags. In this paper, we explored successive impact of voltage sag due to the automatic reclosing of power distribution systems. The actual tests of low voltage loads were accomplished for obtaining the susceptibility of voltage sags. The final results of the test yielded power acceptability curves of voltage sag, and the curves were transformed the 3-dimensional CBEMA(Computer Business Equipment Manufacturer Association) format. For the quantitative evaluation of the impact of successive voltage sags, an assessment formulation using the voltage sag contour was proposed. The proposed formulation was tested by using the voltage sag contour data of IEEE standard and the results of the test. Through the case studies, we verified that the proposed method can be effectively used to evaluate the actual impact of successive voltage sans.

Keywords

References

  1. L. E. Conrad et al., 'Proposed chapter 9 for predicting voltage sags (dip) in revision to IEEE Std 493, the Gold Book,' IEEE Trans. Industry Applications, Vol. 30, No. 3, pp. 805-821, May/June 1994 https://doi.org/10.1109/28.293731
  2. L. E. Conrad and Math H. J. Bollen, 'Voltage sag coordination for reliable plant operation,' IEEE Trans. on Ind. Appl., vol. 33, no. 6, pp. 1459-1464, Nov./Dee. 1997 https://doi.org/10.1109/28.649956
  3. D. L. Brooks, et al., 'Indices for assessing utility distribution system RMS variation performance,' IEEE Trans. on PWRD, vol. 13, no. 1, pp. 254-259, Jan. 1998 https://doi.org/10.1109/61.660886
  4. S.-Y. Yun and J.-C. Kim, 'An evaluation method of voltage sag using a risk assessment model in power distribution system,' International Journal of EP&ES(Elsevier Science), Vol. 25, No. 10, pp. 829-839, December 2003 https://doi.org/10.1016/S0142-0615(03)00063-2
  5. IEEE recommended practice for emergency and standby power systems for industrial and commercial applications, ANSI/IEEE Std. 446, 1987
  6. Y. Sekine, T. Yamamoto, S. Mori, N. Saito, and H. Kurokawa, 'Present state momentary voltage dip interferences and the countermeasures in Japan,' CIGRE 36-206, September 1992
  7. J. Lamoree, D. Mueller, P. Vinett, W. Jones, and M. Samotyj, 'Voltage' sag analysis case studies,' IEEE Trans. Industry Applications, Vol. 30, No. 4, pp. 1083-1089, July/August 1994 https://doi.org/10.1109/28.297926
  8. J. Arrillaga, N. R. Watson, and S. Chen, Power system quality assessment, Chichester: John Wiley & Sons, 2000
  9. IEEE recommended practice for evaluating electric power system compatibility with electronic process equipment, IEEE Std. 1346, 1998
  10. IEEE guide for service to equipment sensitive to momentary voltage disturbances, IEEE Std. 1250, 1995
  11. J. C. Kim and J. R. Shin, A study for the optimal reclosing method on the transmission and distribution line, Korea Electric Power Research Institute, Taejeon, Chung-Nam, Korea, Tech. Rep. TR.95YJ18.J1998.12, April 1998