References
- Kalfas, A. I., 1994, 'Transition to Turbulence in the Boundary Layer of Turbomachinery Blading,' Ph.D. Thesis, Cranfield University, UK
- Hazarika, B. K. and Hirsch, C, 1997, 'Transition Over C4 Leading Edge and Measurement of Intermittency Factor Using PDF of Hot-Wire Signal,' ASME Trans. Journal of Turbo machinery, Vol. 119, pp. 412-425 https://doi.org/10.1115/1.2826363
- Lou, W. and Hourmouziadis, J., 2000, 'Separation Bubbles Under Steady and Periodic-Unsteady Main Flow Conditions,' ASME Trans. Journal of Turbomachinery, Vol. 122, pp. 634-643 https://doi.org/10.1115/1.1308568
- Malkiel, E. and Mayle, R. E., 1996, 'Transition in a Separation Bubble,' ASME Trans. Journal of Turbomachinery, Vol. 118, pp. 752-759 https://doi.org/10.1115/1.2840931
- Park, T. C, Jeon, W. P. and Kang, S. H., 2002, 'Effects of Wake-Passing Orientation and Frequency on Unsteady Boundary Layer Transition on an Airfoil,' Trans. of the KSME (B), Vol. 26, No.5, pp. 685-694 https://doi.org/10.3795/KSME-B.2002.26.5.685
- Rim, I. W., Cho, K. R. and Joo, W. G, 2002, 'Experimental Study on the Effects of Upstream Periodic Wakes on Aerofoil-Boundary Layer and Loss,' Trans. of the KSME (B), Vol. 26, No.2, pp. 219-226 https://doi.org/10.3795/KSME-B.2002.26.2.219
- Cumpsty, N. A., Dong, Y. and Li, Y. S., 1995, 'Compressor Blade Boundary Layers in the Presence of Wakes,' ASME Paper No. 95-GT-443
- Solomon, W. J. and Walker, G. J., 1995, 'Observations of Wake-Induced Transition on an Axial Compressor Blade,' ASME Paper No. 95-GT-381
- Halstead, D. E., Wisler, D. C, Okiishi, T. H., Walker, G. J., Hodson, H. P. and Shin, H. W., 1997a, 'Boundary Layer Development in Axial Compressors and Turbines, Part 1 of 4: Composite Picture,' ASME Trans. Journal of Turbo machinery, Vol. 119, No. 1, pp. 114-127 https://doi.org/10.1115/1.2828772
- Halstead, D. E., Wisler, D. C, Okiishi, T. H., Walker, G. J., Hodson, H. P. and Shin, H. W., 1997b, 'Boundary Layer Development in Axial Compressors and Turbines, Part 2 of 4: Compressors,' ASME Trans. Journal of Turbomachinery, Vol. 119, No.3, pp. 426-444 https://doi.org/10.1115/1.2841142
- Robinson, C. J., 1991, 'End-Wall Flows and Blading Design for Axial Flow Compressors,' Ph.D. Thesis, Cranfield University, UK.
- Foley, A. C. and Ivey, P. C., 1996, 'Measurement of Tip-Clearance Flow in a Multistage Axial Flow Compressor,' ASME Trans. Journal of Turbomachinery, Vol. 118, pp. 211-217 https://doi.org/10.1115/1.2836628
- Lyes, P. A. and Ginder, R. B., 1998, 'Experimental Evaluation of the High-to-Low Speed Transformation Process for a Highly Loaded Core Compressor Stage,' ASME Paper No. 98-GT-334
- Schulz, H. D., Gallus, H. E. and Lakshminarayana, B., 1990, 'Three-Dimensional Separated Flow Field in the Endwall Region of an Annular Compressor Cascade in the Presence of Rotor-Stator Interaction: Part 1 - Quasi-Steady Flow Field and Comparison With Steady-State Data,' ASME Trans. Journal of Turbomachinery, Vol. 112, pp. 669-678 https://doi.org/10.1115/1.2927707
- Weingold, H. D., Neubert, R. J., Behlke, R. F. and Potter, G. E., 1997, 'Bowed Stators: An Example of CFD Applied to Improve Multistage Compressor Efficiency,' ASME Trans. Journal of Turbomachinery, Vol. 119, pp. 161-168 https://doi.org/10.1115/1.2841086
- Swoboda, M., Ivey, P. C., Wenger, U. and Gummer, V., 1998, 'An Experimental Examination of Cantilevered and Shrouded Stators in a Multistage Axial Compressor,' ASME Paper No. 98-GT-282