실리콘 웨이퍼 연삭의 형상 시뮬레이션

Profile Simulation in Mono-crystalline Silicon Wafer Grinding

  • 김상철 (부산대학교 정밀기계공학과) ;
  • 이상직 (부산대학교 정밀기계공학과) ;
  • 정해도 (부산대학교 정밀정형 및 금형가공연구소) ;
  • 최헌종 (한국생산기술연구원) ;
  • 이석우 (한국생산기술연구원)
  • 발행 : 2004.10.01

초록

Ultra precision grinding technology has been developed from the refinement of the abrasive, the development of high stiffness equipment and grinding skill. The conventional wafering process which consists of lapping, etching, 1 st, 2nd and 3rd polishing has been changed to the new process which consists of precision surface grinding, final polishing and post cleaning. Especially, the ultra precision grinding of wafer improves the flatness of wafer and the efficiency of production. Furthermore, it has been not only used in bare wafer grinding, but also applied to wafer back grinding and SOI wafer grinding. This paper focuses on the flatness of the ground wafer. Generally, the ground wafer has concave pronto because of the difference of wheel path density, grinding temperature and elastic deformation of the equipment. Wafer tilting is applied to avoid non-uniform material removal. Through the geometric analysis of wafer grinding process, the profile of the ground wafer is predicted by the development of profile simulator.

키워드

참고문헌

  1. Oishi, H., '400mm-Diameter wafer qualities from slicing to grinding,' Advances in Abrasive Technology, Vol. 3, pp. 29-36, 2000
  2. Tso, P. L. and Liao, W. J., 'A study of surface profile on grinding of silicon wafer,' Advance in Abrasive Technology, Vol. 3, pp. 219-225, 2000
  3. Kerstan, M. and Pietsch, G. J., 'Silicon wafer substrate planarization using simultaneous double-disk grinding : impact on wafer surface geometry, morphology & subsurface crystal damage,' Advances in Abrasive Technology, Vol. 3, pp. 211-218. 2000
  4. Conway, J. C. and Kirchner, H. P., 'The mechanics of crack initiation and propagation beneath a moving sharp indentor,' Journal of Materials Science, Vol. 15, pp. 2879-2883, 1980 https://doi.org/10.1007/BF00550558
  5. Komanduri, R., Chandrasekaran, N. and Raff, L. M., 'Orientation effects in nanometric cutting of single crystal materials : An MD simulation apporach,' Annals of CIRP, Vol. 48, pp. 67-72, 1998 https://doi.org/10.1016/S0007-8506(07)63133-3
  6. Jeong, H. D., Ohmori, Hitoshi., Qian, Jun., Kato, Teruko. and Kim, G. N., 'Fabrication of micro shapes for advanced materials by ELID grinding,' Journal of KSPE, Vol. 17, No. 3, pp. 122-128, 2000
  7. Jeong, H. D., Qian, Jun., Kim, G. N. and Ohmori, Hitoshi., 'Internal cylindrical grinding with super abrasive wheel and electrolytic in-process dressing,' Journal of KSPE, Vol. 17, No. 4, pp. 155-162, 2000