참고문헌
- Yeh, S., Hsu, P., 'Adaptive-feedrate interpolation for parametric curves with a confined chord error,' Computer-Aided Design, Vol. 34, pp. 229-237, 2002 https://doi.org/10.1016/S0010-4485(01)00082-3
- Shpitalni, M., Koren, Y., Lo, C. C., 'Realtime curve interpolator,' Computer-Aided Design, Vol. 26, No. 11, pp. 832-838, 1994 https://doi.org/10.1016/0010-4485(94)90097-3
- Yang, D. C. H., Kong, T., 'Parametric interpolator versus linear interpolator for precision CNC machining,' Computer - Aided Design, Vol. 26, No. 3, pp. 225-234, 1994 https://doi.org/10.1016/0010-4485(94)90045-0
- Huang, J. T., Yang, D. C. H., 'A generalized interpolator for command generation of parametric curves in computer-controlled machines,' Japan/USA Symposium on Flexible Automation- Vol. 1, pp. 393-399, 1992
- Chou, J. J., Yang, D. C. H., 'Command generation for three axis CNC machining,' Journal of Engineering for Industry, Vol. 113, pp. 305-310, 1991 https://doi.org/10.1115/1.2899701
- Farouki, R. T., Manni, C., Sestini, A., 'Real-time interpolators for Bezier conics,' Computer-Aided Geometric Design, Vol. 18, pp. 639-655, 2001 https://doi.org/10.1016/S0167-8396(01)00058-9
- Lartigue, C., Thiebaut, F., Maekawa, T., 'CNC tool path in terms of B-spline curves,' Computer-Aided Design, Vol. 33, pp. 307-319, 2001 https://doi.org/10.1016/S0010-4485(00)00090-7
- Bahr, B., Xiao, X., Krishnan, K., 'A real time scheme of cubic parametric curve interpolations for CNC systems,' Computers in Industry, Vol. 45, pp. 309-317, 2001 https://doi.org/10.1016/S0166-3615(01)00087-2
- Farouki, R., Manjunathaiah, J., Yuan, G. F., 'G code for the specification of Pythagorean-hodograph tool paths and associated federate functions on open-architecture CNC machines,' International Journal of Machine Tools & Manufacture, Vol. 39, pp. 123-142, 1999 https://doi.org/10.1016/S0890-6955(98)00018-2
- Cheng, M.-Y., Tsai, M.-C., Kuo, J.-C., 'Real-time NURBS command generators for CNC servo controllers,' International Journal of Machine Tools & Manufacture, Vol. 42, pp. 801-813, 2002 https://doi.org/10.1016/S0890-6955(02)00015-9
- Krishnan, K. K., Kappen, J., Bahr, B., 'Calculation of variable federate and spindle speed for NURBS based CNC machining,' Transactions of NAMRI/SME, Vol. 24, pp. 429-435, 2001
- Kim, M. J., Song, J. I., Kwon, D. S., 2000, 'NURBS interpolation algorithm for CNC machining with high speed and high precision,' Journal of KSPE, Vol. 17, No. 1, pp. 192-197
- Hong, W. P., Yang, M. Y., 2000, 'NURBS interpolation algorithm for CNC machines,' Journal of KSPE, Vol. 17, No. 12, pp. 115-120
- Farouki, R. T., Manjunathaiah, J., Nicholas, D., Yuan, G. F., Jee, S., 'Variable-feedrate CNC interpolators for constant material removal rates along Pythagorean-hodograph curves,' Computer- Aided Design, Vol. 30, No. 8, pp. 631-640, 1998 https://doi.org/10.1016/S0010-4485(98)00020-7
- Tikhon, M., Ko, T. J., Kim, H. S., Kim, J. H., 'Variable feedrate interpolator for NURBS curve considering material removal rate,' Journal of KSMTE, Vol. 12, No. 2, pp. 1-8, 2003
- Piegl, L., Tiller, W., The NURBS book, Berlin, Springer, 1997
- Kim, S. J., Jung, T. S., Yang, M. Y., 'Feedrate optimization using CL syrface,' Journal of KSPE, Vol. 21, No. 4, pp. 39-47, 2004