Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

Average Flow Model with Elastic Deformation for CMP

화학적 기계 연마를 위한 탄성변형을 고려한 평균유동모델

  • 김태완 (부산대학교 기계기술연구소) ;
  • 구영필 (부경대학교 기계공학부) ;
  • 조용주 (부산대학교 기계공학부)
  • Published : 2004.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

We present a three-dimensional average flow model considering elastic deformation of pad asperities for chemical mechanical planarization. To consider the contact deformation of pad asperities in the calculation of the flow factor, three-dimensional contact analysis of a semi-infinite solid based on the use of influence functions is conducted from computer generated three dimensional roughness data. The average Reynolds equation and the boundary condition of both force and momentum balance are used to investigate the effect of pad roughness and external pressure conditions on film thickness and wafer position angle.

Keywords

References

  1. Martinez, M.A., 'Chemical Mechanical Polishing:Route to Global Planahzation,' Solid State Technol,5, 26-31, 1991
  2. Li, S.H. and Miller, R.O., 'Chemical MechanicalPolishing in Silicon Processing,' Semiconductorsand Semimetals, NY: Academic Press, 2000
  3. Zhao, Y. and Chang, L.A., 'Micro-Contact and WearModel for Chemical-Mechanical Polishing of Sili-con Wafers,' Wear, 252, 220-226, 2002
  4. Nanz, G. and Camilletti, L.E., 'Modeling of Chemi-cal-Mechanical Polishing: A Review,' 1EEE Transac-tions on Semiconductor Manufacturing, 8(4), 382-389, 1995
  5. Yu, Y, Yu, C.C. and Orlowski, M.A., 'StatisticalPolishing Pad Model for Chemical Mechanical Pol-ishing,' IEEE IEDM. Washington DC, Dec., 865-868, 1993
  6. Larsen-Basse, J. and Liang, H., 'Probable Role ofAbrasion in Chemo-Mechanical Polishing of Tung-sten,' Wear, 233-235, 647-654, 1999
  7. Liu, C., Gai, B., Tseng, W. and Yeh, C., 'Modelingof Thee Wear Mechanism During Chemical Mechan-ical Polishing,' J. Electrochem. Soc.. 142(2), 716-721, 1996
  8. Rubbels, S.R. and Eyman, L.M., 'Tribology Analy sisof Chemical-Mechanical Polishing,' J. Electrochem.Soc., 141(6), 1698-1701, 1994
  9. Rubbels, S.R., 'Featured-Scale Fluid-Based ErosionModeling for Chemical-Mechanical Polishing,' J.Electrochem. Soc., 141(7), 1900-1905, 1994
  10. Sundararajan, S. and Thakurta, D.G., 'Two-Dimen-sional Wafer-Scale Chemical-Mechanical Planariza-tion Models Based on Lubrication theory and MassTransport,' J. Electrochem. Soc., 146(2), 761-766, 1999
  11. Tichy, J., Levert, J.A., Shan, L. and Danyluk, S.,'Contact Mechanics and Lubrication Hydrodynam-ics of Chemical-Mechanical Polishing,' J. Electro-chem. Soc., 146(4), 1523-1528, 1999
  12. Jeng, Y.R. and Tsai, H.J., 'Improved Model ofWafer/Pad Powder Slurry for CMP,' J. Electrochem.Soc., 150(6), 348-354, 2003
  13. Patir, N. and Cheng, H.S., 'An Average Flow Modelfor Determining Effects of Three-DimensionalRoughness on Patial Hydrodynamic Lubrication,'ASME J. Lubri. Tech., 100, 12-17, 1978
  14. Patir, N. and Cheng, H.S., 'Application of AverageFlow Model to Lubrication between Rough SlidingSurfaces,' ASME J. Lubri. Tech., 101, 220-230, 1979
  15. Nayak, P.R., 'Random Pressure Model of RoughSurfaces,' ASME J. Lubri. Tech., 93(3), 398-407, 1971
  16. Patir, N., 'A Numerical Procedure for Random Gen-eration of Rough Surfaces,' Wear, 47, 263-277, 1987
  17. Kim, T.W., Koo, Y.P. and Cho, Y.J., 'The ElasticContact Analysis of 3D Rough Surface of NongaussianHeight Distribution,' J. KSPE, 18(10), 53-60, 2001
  18. Ren, N. and Lee, S.C., 'The Effects of SurfaceRoughness and Topography on the Contact Behaviorof Elastic Bodies,' ASME J. Tribology, 116(4), 804-811, 1994