International Journal of Automotive Technology

  • 제5권2호
  • /
  • Pages.115-122
  • /
  • 2004
  • /
  • 1229-9138(pISSN)
  • /
  • 1976-3832(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

EVALUATION OF VEHICLE DYNAMIC CONTROL FOR ROLOVER PREVENTION

  • Ungoren, A.Y. (Department of Mechanical Engineering, University of Michigan) ;
  • Peng, H. (Department of Mechanical Engineering, University of Michigan)
  • 발행 : 2004.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Evaluation of active safety control systems usually relies heavily on field testing and is time-consuming and costly. Advances in computer simulations make it possible to perform exhaustive design trials and evaluations before field testing, and promise to dramatically reduce development cost and cycle time. In this paper, a comprehensive simulation-based evaluation procedure is proposed, which combines standard evaluation maneuvers, worst-case techniques, and a driver model for closed-loop path following evaluations. A vehicle dynamic controller (VDC) for a popular Sport Utility Vehicle is evaluated using the proposed procedure. Simulation results show that the proposed procedure can be used to assess the performance of the VDC under various conditions and provides valuable information for the re-design of the VDC.

키워드

참고문헌

  1. CARSIM User Manual (2003). http://www.carsim.com/
  2. Chen, B. and Peng, H. (2001). Differential-braking-based rollover prevention for sport utility vehicles with human-in-the-loop evaluations. VehicIe System Dynamics 36, 4-5, 359-389 https://doi.org/10.1076/vesd.36.4.359.3546
  3. Garrick, J. F., Garrott, W. K., and O'Harra, B. C. (2002). A comprehensive experimental examination of test maneuvers that may induce on-road. Untripped, Light Vehicle Rollover-Phase IV of NHTSA's Light Vehicle Rollover Research Program, DOT HS 809 513
  4. Hac, A. (2002). Influence of active chassis systems on vehicle propensity to maneuver-induced rollovers. SAE Paper No. 2002-01-0967. SAE Congress and Exposition.
  5. Luus, R. (2000). Iterative Dynamic Programming. Chapman & Hall/Crc. Monographs and Surveys in Pure and Applied Mathematics
  6. Matsumoto, S., Yamaguchi, H., Inoue, H. and Yasuno, Y. (1992). Improvement of vehicle dynamics through braking force distribution control. SAE Paper No. 920645, SAE Congress and Exposition
  7. National Highway Traffic Safety Administration. (1973). Advance Notice of Proposed Rulemaking (ANPRM) on Resistance to Rollover, NHTSA 38 FR 959
  8. National Highway Traffic Safety Administration. (1998). Traffic Safety Facts 1997
  9. National Highway Traffic Safety Administration. (2002). Traffic Safety Facts 2001
  10. Pierre, D. A. (1986). Optimization Theory with Applications. Dover Publications. New York
  11. Toyota (2001). Comments on part 575 consumer information regulations. Rollover resistance-Dynamic rollover testing. Docket No. NHTSA-2001-9663
  12. Ungoren, A. Y. and Peng, H. (2004). An adaptive lateral preview driver model. to appear in Vehicle System Dynamics
  13. Ungoren, A.Y., Peng, H. and Milot, D. (2001). Rollover propensity evaluation of an SUV equipped with a TRW VSC System. SAE Paper No. 2001-01-0128, SAE Congress and Exposition
  14. Ungoren, A.Y., Peng, H. and Milot, D. (2001). Rollover propensity evaluation of an SUV equipped with a TRW VSC System. SAE Paper No. 2001-01-0128, SAE Congress and Exposition
  15. Zanten, A. V., Erhardt, R. and Pfaff, G. (1995). VDC, The vehicle dynamics control system of bosch. SAE Paper No. 950759, SAE Congress and Exposition