Linear Static and Free Vibration Analysis of Laminated Composite Plates and Shells using a 9-node Shell Element with Strain Interpolation

변형률 보간 9절점 쉘 요소를 이용한 적층복합판과 쉘의 선형 정적 해석 및 자유진동 해석

  • 최삼열 ((주)이오엔지니어즈 구조부) ;
  • 한성천 (대원과학대학 토목과)
  • Published : 2004.09.01

Abstract

The analysis of linear static and free vibration problems of isotropic and laminated composite plates and shells is performed by the improved 9-node shell element with the new strain displacement relationship. In that relationship, the effect of new additional terms between the bending strain and displacement has been investigated in the warping problem. Natural co ordinate based strains, stresses and constitutive equations are used. The assumed natural strain method is used to alleviate both membrane and shear locking behavior from the element. The Lanczos method is employed in the calculation of the eigenvalues of laminated composite structures and the Gauss integration rule is adopted to evaluate the mass matrix. The numerical examples are compared with the analytical solutions to validate the current formulation and the results presented could be useful for the understanding of the behaviour of laminates under free vibration conditions.

등방성 혹은 비등방성 적층복합판 및 쉘의 선형 정적 문제와 자유진동 해석이 새로운 변형률 변위 관계가 도입된 개선된 9절점 쉘 요소에 의하여 수행되었다. 그 관계에서 새롭게 추가된 휨 변형률과 변위사이의 관계 항들에 의한 효과는 비틀어진 보 문제에서 검토되었다. 정식화의 전 과정을 통해, 식들의 모든 항들은 자연 좌표계에 기초하고 있다. 가정 자연 변형률 방법이 막 잠김과 전단 잠김 거동을 제거하기 위하여 사용하였다. 적층 복합판 및 쉘의 고유치의 계산을 위해 Lanczos방법을 사용하였고 질량행렬을 구성하기 위하여 Gauss적분법을 사용하였다. 정식화의 유효성을 평가하기 위해 수치 예제를 해석적 해와 비교하였으며, 제시된 결과는 자유진동 조건하에서 적층체의 거동을 이해하는데 유용할 것이다.

Keywords

References

  1. Ahmad, S., Irons, B.M. and Zienkiewicz, O.C., 'Analysis of Thick and Thin Shell Structures by Curved Finite Elements', Int. J. Num. Meth. Eng., Vol. 2, 1970, pp. 419-451 https://doi.org/10.1002/nme.1620020310
  2. Huang, H.C. and Hinton, E., 'A new nine node degenerated shell element with enhanced membrane and shear interpolation', Int. J. Num. Meth. Eng., Vol. 22, 1986, pp. 73-92 https://doi.org/10.1002/nme.1620220107
  3. Belytschko, T., Wong, B. L. and Stolarski, H., 'Assumed strain stabilization procedure for the 9.node lagrange shell element', Int. J. Num. Meth. Eng., Vol. 28, 1989, pp. 385-414 https://doi.org/10.1002/nme.1620280210
  4. Kanok-Nukulchai, W. and Wong, W.K., 'Element based Lagrangian formulation for large‐deformation analysis', Comput. Struct., Vol. 30, 1988, pp. 967-974 https://doi.org/10.1016/0045-7949(88)90136-8
  5. Lee, S.J. and Kanok-Nukulchai, W., 'A Nine- Node Assumed Strain Finite Element for Large Deformation Analysis of Laminated Shells', Int. J. Num. Meth. Eng., Vol. 42, 1998, pp. 777-798 https://doi.org/10.1002/(SICI)1097-0207(19980715)42:5<777::AID-NME365>3.0.CO;2-P
  6. Love, A.E.H., 'The small vibrations and deformations of thin elastic shell', Philosophical Transactions of the Royal Society, Vol. 179, 1888, pp. 527-546
  7. Donell, L.H., 'Stability of thin‐walled tubes under torsion', NASA Report 479, 1933
  8. Leissa, A.W., 'Vibrations of shells', NASA PA‐288, 1973
  9. Qatu, M.S., 'Review of shallow shell vibration research', Shock and Vibration Digest, Vol. 24, 1992, pp. 3-15
  10. Liew, K.M., Lim, C.W. and Kitipornchai, 'S., Vibration of shallow shells: a review with bibliography', Applied Mechanics Reviews, Vol. 50, 1997, pp. 431-444 https://doi.org/10.1115/1.3101731
  11. Lee, S.J. and Han, S.E., 'Free.Vibration Analysis of Plates and Shells with a Nine.Node Assumed Natural Degenerated Shell Element', Journal of Sound and Vibration, Vol. 241, No. 4, 2001, pp. 601-633 https://doi.org/10.1006/jsvi.2000.3313
  12. 한성천, 윤석호, '고차전단변형을 고려한 적층복합판 및 쉘의 열.습윤 휨해석', 한국전산구 조공학회 논문집, 제12권 제1호, 1999, pp. 37-46
  13. 한성천, 유용민, 박대용, 장석윤, '개선된 고차이론을 이용한 복합재료 적층구조물의 탄성 및 점탄성적 휨, 진동해석', 한국강구조학회 논문집, 제14권 제1호, 2002, pp. 1-12
  14. 한성천, 천경식, 최회권, 장석윤, '3차원 고차이론을 이용한 역대칭 앵글‐플라이 복합재료 적층판의 동적거동', 대한토목학회 논문집, 제23권 제4A호, 2003, pp. 647-655
  15. Ma, H. and Kanok-Nukulchai, W., 'On the application of assumed strained methods', Structural Engineering and Construction, Achievements, Trends and Challenges, Kanok‐Nukulchai et al. (eds.), 1989, AIT, Bankok, Thailand
  16. Han, S.C., Kim, K.D. and Kanok-Nukulchai, W., An Element-Based 9-node Resultant Shell Element for Large Deformation Analysis of Laminated Composite Plate and Shell., Accepted for Publication in the Structural Engineering and Mechanics
  17. Kim, K.D., Lomboy, G.R. and Han, S.C., 'A co- rotational 8‐node assumed strain shell element for postbuckling analysis of laminated composite plates and shells', Comput. Mech., Vol. 30, No. 4, 2003, pp. 330-342 https://doi.org/10.1007/s00466-003-0415-6
  18. Reddy, J.N., Mechanics of Laminated Composite Plates, CRC Press, Florida, 1997
  19. Kanok-Nukulchai, W., 'A simple and efficient finite element for general shell analysis', Int. J. Num. Meth. Eng., Vol. 14, 1979, pp. 179-200 https://doi.org/10.1002/nme.1620140204
  20. MacNeal, R.H. and Harder, R.L., 'A proposed standard set of problems to test finite element accuracy', Finite Elements in Analysis and Design, Vol. 1, 1985, pp. 3-20 https://doi.org/10.1016/0168-874X(85)90003-4
  21. Simo, J.C., Fox, D.D. and Rifai, M.S., 'On stress resultant geometrically exact shell model. Part II: the linear theory, computational aspects', Comput. Meth. Appl. Mech. Eng., Vol. 73, 1989, pp. 53-92 https://doi.org/10.1016/0045-7825(89)90098-4
  22. Liu, W.K., Lam, D., Law, S.E., Belytschko, T., 'Resultant stress degenerated shell element', Comput. Meth. Appl. Mech. Eng., Vol. 55, 1986, pp. 259-300 https://doi.org/10.1016/0045-7825(86)90056-3
  23. Srinivas, C.V., Rao, J. and Rao, A.K., 'An exact analysis for vibration of simply supported homogeneous and laminated, thick rectangular plates', Journal of Sound and Vibration, Vol. 12, 1970, pp. 187-199 https://doi.org/10.1016/0022-460X(70)90089-1
  24. Zienkiewicz, O.C. and Taylor, R.L., The Finite Element Method, Butterworth.Heinemann, London, 2000