대한전자공학회논문지TC (Journal of the Institute of Electronics Engineers of Korea TC)

대한전자공학회 (The Institute of Electronics and Information Engineers)
권호 표지

도체판이 삽입된 밀리미파 세라믹 패키지

Millimeter-wave Ceramic Package having Embedded Metal Sheet

  • 김진태 (아주대학교 전자공학과) ;
  • 서재옥 ;
  • 방현국 (아주대학교 전자공학) ;
  • 박성대 (전자부품연구원 고주파재료 연구센) ;
  • 조현민 (전자부품연구원 고주파재료 연구센) ;
  • 강남기 (전자부품연구원 고주파재료 연구센) ;
  • 이해영 (아주대학교 전자공학과)
  • 발행 : 2004.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

패키지는 전기적인 특성에 있어서 우수한 고주파 전송 특성을 지녀야한다. 그러나 집적회로면이 위로 향하는 세라믹 패키지(Face-up Package)는 본드와이어 연결 시 고주파의 기생 특성이 크게 증가하여 시스템 전체의 성능에 큰 제한을 가져온다. 본 논문에서는 향상된 정합특성을 갖는 새로운 밀리미터파 세라믹 패키지 급전구조를 제안하였고, 유한요소법(FEM: Finite Element Method)을 이용하여 20 ∼ 50 GHz에서 해석 및 설계를 하고 제작하였다. 측정 결과, 삽입된 금속판 (Embedded Metal Sheet)을 가지는 세라믹 패키지 급전구조는 47GHz까지 기존의 세라믹 패키지보다 0.85dB 그리고 본드와이어 부분에 일반적인 에폭시( ε/sub γ/ = 4)를 사용하여 몰딩한 세라믹 패키지보다 0.4dB가 개선된 삽입손실의 특성을 얻을 수 있었다. 따라서 본 해석결과는 소형의 세라믹 패키지 및 MMIC(Monolithic Microwave Integrated Circuit) 모듈 개발에 효과적으로 활용될 수 있으리라 기대된다.

High performance packages must provide excellent transmission characteristics. In face-up ceramic packages, however, parasitic characteristics of bondwires are not negligible at millimeter-wave frequencies. Consequently, the electrical performance of ceramic packages is degraded. In をis paper, we propose a new millimeter-wave ceramic package feed-through having Embedded Metal Sheets (EMS). The package that contains double-bondwire interconnections is analyzed by the FEM (Finite Element Method) and measured from 20 to 50GHz. As a result, the proposed package having Embedded Metal Sheets (EMS) achieved 0.85dB, 0.4dB insertion loss improvement on the conventional and the double bondwires buried in epoxy ( $\varepsilon_{{\gamma}}$/ = 4) ceramic package respectively to 47GHz. This improved ceramic package will be useful for MMICs modules and small ceramic packages developments.amic packages developments.

키워드

참고문헌

  1. L. D. Robertson, MMIC Design, IEEE, London, UK, 1995
  2. L. P. B. Katehi, 'The role of EM modeling in integrated packaging,' IEEE AP-S Dig., pp. 1005-1008, July. 1993
  3. Hao-Hui Chen and Shyh-Jong Chung, 'Analysis of a Partially Sealed Package for Microstrip-Line Circuits,' IEEE Trans. on Microwave Theroy and Techniques, vol. 46, no. 2, pp.2124-2130, DEC. 1998 https://doi.org/10.1109/22.739293
  4. Deborah S. Wein, 'Advanced Ceramic Packaging for Microwave and Millimeter Wave Application,' IEEE Trans. on Antennas and Propagation, vol. 40, no. 9, pp940-948, SEP. 1995
  5. Tsang-Der Ni, James DeMarco, Dana Sturzebecher, and Mike Cummings, 'High Frequency Hermetic Packages using LTCC,' IEEE MTT-S Digest, Vol. 3, pp. 1627-1630, 1996 https://doi.org/10.1109/MWSYM.1996.512250
  6. M. Ito, K. Maruhashi, K. Ikuina, N. Senba, N. Takahashi, and K. Ohata, 'Low Cost Multi Layer Ceramic Package for Flip-Chip MMIC up to W-Band,' IEEE MTT-S Digest, Vol. 1, pp. 57-64, 2000 https://doi.org/10.1109/MWSYM.2000.860884
  7. Kenji Kitazawa, Shinichi Koriyama, Hidehiro Minamiue, and Mikio Fujii, '77-GHz-Band Surface Muntable Ceramic Package,' IEEE Trans. on Microwave Theory and Techniques, vol. 48, No. 9, pp.1488-1491, SEP. 2000 https://doi.org/10.1109/22.868999
  8. Dipak Ceramic Package, Dielectric Laboratories, INC.
  9. StratEdge Corp.
  10. T. Krems, W. Haydl, L. Verweyen, M. Schlechtweg, H. Massler, and J. Ruediger, 'Coplanar bond wire interconnection for millimeter-wave applications,' The 4th Topical Meeting on Electrical Performance of Electronic Packaging,' Portland, OR, pp. 178-180, 1995
  11. F. Aliment, P. Mezzanotte, L. Roselli, R. Sorrentino, 'An Equivalent Circuit for the Double Bonding Wire Interconnection,' IEEE MTT-S Digest, Anaheim, CA, pp. 633-636, 1999 https://doi.org/10.1109/MWSYM.1999.779841
  12. Steve Nelson, Marilyn Youngblood, Jeanne Pavio, 'Optimum Microstrip Interconnects,' Proc. IEEE MTT-S Digest, Boston, MA, pp. 1071-1074, 1991 https://doi.org/10.1109/MWSYM.1991.147199
  13. S.-J. Kim, H.-Y. Lee, 'Buried Double Bondwires for Microwave Hermetic Packages,' IEEE Electronics Letters, Vol. 33, No. 25, pp. 2130-2132, December 1997 https://doi.org/10.1049/el:19971438
  14. Thomas P. Budka, 'Wide-Bandwidth Millimeter-Wave Bond-Wire Interconnects,' IEEE Trans. on Microwave Theory and Techniques,vol. 49, No. 4, pp.715-718, APRIL. 2001 https://doi.org/10.1109/22.915447
  15. Dipak Ceramic Package, 'm20011', 'm20018', Dielectric Laboratories, INC.
  16. Ceramic Package, '580286', '580404'StratEdge Corp.
  17. James Schellenberg, 'High-Efficiency, Packaged Ka-Band MMIC Operating at 24 Volts,' IEEE MTT-S Digest, Vol. 2, pp. 577-580, 1998 https://doi.org/10.1109/MWSYM.1998.705059
  18. T. Satoh, T. Shimura, S. Ichikawa, A. Betti-Berutto, C. Poledrelli, Y. Furukawa, Y. Hasegawa, S. Kurodaand, and J. Fukaya, 'A Compact PA MMIC Module for K-Band High Speed Wireless Systems,' IEEE MTT-S Digest, Vol. III, pp. 1333-1336, 2000 https://doi.org/10.1109/MWSYM.2000.861766
  19. Scott A. Raby, Andreas C. Cangellaris, 'Interconnect Properties and Multiayer Bandpass Filter Design in LTCC Substrates,' IEEE Wireless Communications Confernce, pp. 187-192, 1997
  20. L.J. Golonka, K.-J. Wolter, A. Dziedzic, J. Kita, L. Rebenklau, 'Embedded Passive Components for MCM,' 24th International Spring Seminar on Electronics Technology, pp. 73-77, 2001 https://doi.org/10.1109/ISSE.2001.931015
  21. S. Nelson, M. Youngblood, J. Pavio, B. Larson, R. Kottman, 'Optimum microstrip interconnects,' Proc. IEEE MTT-S Dig., Boston, MA, pp. 1071-1074, 1991 https://doi.org/10.1109/MWSYM.1991.147199
  22. HFSS(High Frequency Structure Simulator), ver 7.0, Ansotf