Study on Evaporation Pressure Drop of R- l34a, R-407C, and R-410A in the Oblong Shell and Plate Heat Exchanger

오블롱 셀 플레이트 열교환기에서의 R-l34a, R-407C, R-410A의 증발 압력강하에 관한 실험적 연구

  • 박재홍 (부경대학교 냉동공조공학과) ;
  • 김영수 (부경대학교 기계공학부)
  • Published : 2004.09.01

Abstract

This study reports pressure drops during evaporation for R-l34a, R-407C (a mixture of 23 wt% R-32, 25 wt% R-125, and 52 wt% R-l34A) and R-410A (a mixture of 50 wt% R-32 and 50 wt% R-125) in the oblong shell and Plate heat exchanger. The effects of the mass fluxes, heat fluxes, refrigerant saturation temperatures and vapor quality of refrigerants on the measured data were explored in detail. The present data showed that pressure drops of all refrigerants increase with the vapor quality. At a higher mass flux, pressure drops are higher for the entire range of the vapor quality A rise in the heat flux doesn't show significant effects on the pressure drops. Finally, at a higher saturation temperature the pressure drops are found to be lower. The pressure drops for R-407C were approximately 20% lower than those of R-l34a. R-410A had 33% lower pressure drops than R-l34a. Correlation is also provided for the measured pressure drops in terms of the friction factor.

Keywords

References

  1. ASHRAE Transactions v.99 Heat transfer and pressure drop characteristics of R-134a, R-32, and a mixture of R-32/R-134a inside a horizontal tube Torikoshi, K.;Ebisu, T.
  2. ASHRAE Trans. v.101 no.1 Two-phase flow transfer and pressure drop characteristics of R-22 and R-32/R-125 Wijaya, H.;Spatz, M.W.
  3. ASHRAE Trans. v.121 Heat transfer characteristics and correlations for R-410A flowing inside a horizonal smooth tube Ebisu, T.;Torikoshi, K.
  4. Transactions of the ASME v.121 Evaporation heat transfer and pressure drop of refrigerant R-134a in a plate heat exchanger Yan, Y.Y.;Lin, T.F. https://doi.org/10.1115/1.2825924
  5. Int. J. Heat and Mass Transfer v.42 Condensation heat transfer and pressure drop of refrigerant R-134a in a plate heat exchanger Yan, Y.Y.;Lio, H.C.;Lin, T.F. https://doi.org/10.1016/S0017-9310(98)00217-8
  6. Int. J. Heat and Mass Transfer v.45 Saturated flow Boiling heat transfer and pressure drop of refrigerant R-410A in a vertical plate heat exchanger Lin, T.F.;Hsieh, Y.Y. https://doi.org/10.1016/S0017-9310(01)00219-8
  7. Trans. Am. Soc. Mech. Eng., Ser. C. J. Heat Transfer v.86 Estimation of steady state void fraction by means of the principle of minimum entropy production Zivi, S.M. https://doi.org/10.1115/1.3687113
  8. Heat Transfer Equipment Design Plate heat exchangers and their design theory Shah, R.K.;Focke, W.W.;Shah, R.K.(ed.);Subbarao, E.C.(ed.);Mashelkar, R.A.(ed.)
  9. Int. J. Heat and Mass Transfer v.16 Pressure gradients due to friction during the flow of evaporating tow-phase mixtures in smooth tubes and channels Chisholm, D. https://doi.org/10.1016/0017-9310(73)90063-X
  10. Chemical Engineering Progress Symposium Series v.55 Condensing heat transfer within horizonal tubes Akers, W.W.;Dean, H.A.;Crosser, O.K.