KIEE International Transactions on Power Engineering

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Derivation of Damping-reflected Energy Functions in COI Formulation for Direct Analysis of Transient Stability

  • Park, Byoung-Kon (School of Electrical abd Computer Engineering, Cornell University) ;
  • Kwon, Yong-Jun (Dept. of Electrical Engineering, Yonsei University) ;
  • Lee, Jong-Gi (Dept. of Electrical Engineering, Yonsei University) ;
  • Moon, Young-Hyun (Dept. of Electrical Engineering, Yonsei University)
  • Published : 2004.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents an improved group of energy functions reflecting generator damping effects for multi-machine power systems by using Center of Inertia (COI) formulation as an extension of the previous work. Since rotor angles at the Stable Equilibrium Point (SEP) of post-fault systems are generally calculated in COI, system transient energy can be found without assumption of infinite or slack bus, which is a crucial drawback of the absolute rotor angle frame approach. The developed energy functions have a structure preserving property with which it is very flexible to incorporate various models of power system components, especially various load and generator models. The proposed damping-reflected energy functions are applied to the Potential Energy Boundary Surface (PEBS) method, one of the direct methods. Numerical simulation of WSCC 9-bus shows that conservativeness of the PEBS method can be considerably reduced.

Keywords

References

  1. M. Ribbens-Pavella, & F. J. Evans, ‘Direct methods for studying dynamics of large-scale electric power systems: a survey’, Automatica, 21(1), p. 1-21, 1985
  2. V. E. Henner, 'A Multi-machine Power System Lyapunov Function using the Generalized Popov Criterion', INT. J. Control, Vol. 19, No. 5, p. 969- 976, 1974 https://doi.org/10.1080/00207177408932690
  3. J. L. Willems, ‘The application of Lyapunov methods to to the computation of transient stability regions for multi-machine power systems’, Proc. Int. Elec. Eng., Vol. 115, p. 1315-1317, 1969
  4. Robert J. Davy, et al., ‘Lyapunov functions for multimachine power systems with dynamic loads’, IEEE Trans. On CAS-I, Vol. 44, No. 9, Sep. 1997, pp. 796-812
  5. David J. Hill, et al., ‘Lyapunov functions of Lur’e Postnikov form for structure preserving models of power systems’, Automatica, Vol. 25, No. 3, pp. 453- 460, 1989
  6. Y.H. Moon, Y.J. Kwon, H.S. Ryu, B.K. Choi, ‘Derivation of an energy function reflecting damping effects in multi-machine power systems’, Proc. Of the 40th IEEE CDC, Dec. 2001, pp. 461-465
  7. Y.-H. Moon, B.-K. Choi, T.-H. Roh, ‘Estimating the domain of attraction for power systems via a group of damping-reflected energy functions’, Automatica, Vol. 36, p. 419-425, March 2000
  8. Bergen, A. R., David J. Hill, ‘A structure preserving model for power system stability analysis’, IEEE Trans. OnPwr Appar. Syst., PAS-100, 25-35
  9. Y.-H. Moon, et al., 'Derivation of energy conservation law by complex line integral for the direct energy method of power system stability', Proc. of the 38th IEEE CDC, Dec. 1999, pp. 4662-4667
  10. Y.-H. Moon, et al., ‘Development of an energy function reflecting the transfer conductance for direct stability analysis in power system’, IEE Proc.-Gen. Trans. and Distr., Vol. 144, No. 5, pp. 503-509, 1997
  11. Luis F.C. Alberto et al., ‘Direct Methods for Transient Stability Analysis in Power Systems: State of Art and Future Perspectives’, Proc. Of IEEE Power Tech Conf. 2001, Sep. 2001
  12. Chiang, H.-D., Wu, F.F., ‘A BCU method for direct analysis of power system transient stability’, IEEE Trans. On Power Systems, 1994 pp. 1194-1208