Abstract
The simulation results of final closing by the developed model considering the flows through tide embankment of non-Darcy and through sluice gate agree well to the observed data which shows the model applicability. In comparative analysis with observed data, the simulation results by Homma(1958) are more accurate than those by Na(1987). The free flow equation with discharge coefficient, regardless of free or submerged flows, by Na based on the submergence ratio is applicable to the engineering practices. Because two simulated discharges are greater than the actual one, the correction of discharge coefficients reflecting the irregular section of actual closing gap situation is necessary. In the hydraulic analysis of final closing, the flow through tide embankment has been generally analysed by Darcy. Hydraulic analysis by the correct discharge through tide embankment of non-Darcy flow is necessary, because the ratio between flows through tide embankment and closing gap is relatively great at final closing.
Non-Darcy 제체내 침투수 흐름과 배수갑문을 통한 흐름의 특성을 고려한 최종체절의 수리특성분석 모형에 의한 해석결과는 실측자료와 잘 일치하여 개발된 모형의 적용성이 있음을 보여주었다. 실측치와의 비교에서 본간(1985) 식에 의한 계산결과가 나정우(1987)에 의한 방법보다 비교적 정확함을 보여주었다. 아울러 완전 또는 불완전 월류의 구분이 없이 완전월류식에 잠수도를 이용한 유량계수식을 사용한 나정우 식의 사용성을 보여 주었다. 본간 식과 나정우 식에 의한 계산 값이 실측치보다는 유출입 특성이 크게 나타나 현장에서 체절구간의 불규칙적인 단면 양상을 감안한 유량계수의 조정이 필요할 것으로 판단된다. 일반적으로 최종체절의 수리특성 분석에서 제체구간의 침투수 흐름의 고려는 Darcy 흐름에 기초하여 분석하여왔다. 제체내 침투수의 유량과 개방구간을 통과하는 유량의 비가 체절구간이 좁을수록 크게 나타나, 제체내 침투수의 정확한 해석에 의한 체절구간의 수리특성을 분석해야할 필요가 있다.