한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제14권8호
  • /
  • Pages.734-740
  • /
  • 2004
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

복합재료 테일러링 기법을 이용한 저진동 로터 개발

Use of Composite Tailoring Techniques for a Low Vibration Rotor

  • 이주영 (한국항공우주연구원 스마트무인기 기술개발사업단) ;
  • 박일주 (전북대학교 대학원 항공우주공학) ;
  • 정성남 (전북대학교 기계항공시스템공학부)
  • 발행 : 2004.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this work, the effect of composite couplings and mass distributions on hub loads of a hingeless rotor in forward flight is investigated. The hingeless composite rotor is idealized as a laminated thin-walled box-beam. The nonclassical effects such as transverse shear and torsion warping are considered In the structural formulation. The nonlinear differential equations of motion are obtained by applying Hamilton’s principle. The blade responses and hub loads are calculated using a finite element formulation both in space and time. The aerodynamic forces acting on the blade are calculated using the quasi-steady strip theory. The theory includes the effects of reversed flow and compressibility. The magnitude of elastic couplings obtained by MSC/NASTRAN is compared with the classical pitch-flap($\delta$$_3$) coupling. It Is observed that the elastic couplings and mass distributions of the blade have a substantial effect on the behavior of $N_{b}$ /rev hub loads. About 40％ hub loads is reduced by tailoring or redistributing the structural properties of the blade.e.

키워드

참고문헌

  1. Bramwell, A. R. S., 2001, Bramwell's Helicopter Dynamics. 2nd Edition, pp. 290-318.
  2. Jung, S. N., Nagaraj, V. T. and Chopra, I., 1999, "Assessment of Composite Rotor Blade Modeling Techniques," Journal of the American Helicopter Society, Vol. 44, No.3, pp.188-205. https://doi.org/10.4050/JAHS.44.188
  3. Smith, E. C. and Chopra, I., 1993. "Aeroelastic Response. Loads and Stability of a Composite Rotor in Forward Flight," AIAA Journal. Vol. 31, No.7. pp. 1265-1273. https://doi.org/10.2514/3.49066
  4. Jung, S. N. and Kim, S. J., 1994. "Aeroelastic Response of Composite Rotor Blades Considering Transverse Shear and Structural Damping," AIAA Journal, Vol. 32, No.4. pp. 820-827. https://doi.org/10.2514/3.12059
  5. Jung, S. N., Kim, K. N. and Kim, S. J., 2002. "Forward Flight Stability Characteristics for Composite Hingeless Rotors with Transverse Shear Deformation." AIAA Journal. Vol. 40. No.9, pp.1717-1725. https://doi.org/10.2514/2.1875
  6. Bousman, W. G., 1989. "The Response of Helicopter Rotors to Vibratory Airload." AHS National Specialists' Meeting on Rotorcraft Dynamics, Arlington, Texas, Nov.
  7. Floras, M. W. and Smith, E. C., 2000, "Elastically Tailored Rotor Blades for Stall Alleviation and Vibration Reduction," AHS Aeromechanics Specialists' Meeting. Atlanta, Georgia.
  8. 정성남, 김경남, 김승조, 1997, "전진비행시 복합재료 헬리콥터 회전익의 공탄성에 대한 파리미터 연구," 한국소음진동공학회논문집, 제7권, 제6호, pp.24-36.
  9. Bir, G. and Chopra, I., University of Maryland Advanced Rotorcraft Code: Theory Manual. July 1994.
  10. Weller, W. H., 1990, "Relative Aeromechanical Stability Characteristics for Hingeless and Bearingless Rotors." Journal of the American Helicopter Society, Vol. 35, No.3, pp. 68-77. https://doi.org/10.4050/JAHS.35.68
  11. Wilbur, M. L., Yeager, W. T., Singleton, J. D. and Mirick, P. H., 1998, "Wind-Tunnel Evaluation of the Effect of Blade Nonstructural Mass Distribution on Helicopter Fixed-System Loads," NASA/TM-1998-206281.