DOI QR코드

DOI QR Code

산소분압의 변화에 따른 ITO/polymeric 박막의 특성

Characteristics of ITO/polymeric Films with Change of Oxygen Partial Pressure

  • 신성호 (기술표준원 에너지자원 표준과) ;
  • 김현후 (두원공과대학 전자과)
  • 발행 : 2004.08.01

초록

Transparent conducting indium tin oxide (TC-ITO) thin films on polymeric substrates have been deposited by a dc reactive magnetron sputtering without heat treatments. The polymeric substrates are acryl (AC), poly carbornate (PC), and polyethlene terephthalate (PET) as well as soda lime glass is also used to compare with the polymeric substrates. Sputtering parameters are an important factor for high quality of TC-ITO thin films prepared on polymeric substrates. Furthermore, the material, electrical and optical properties of as-deposited ITO films are dominated by the ratio of oxygen partial pressure. As the experimental results, the surface roughness of ITO films becomes rough as the oxygen partial pressure increases. The electrical resistivity of as-deposited ITO films decreases initially, and then increases with the increase of oxygen partial pressure. The optical transmittance at visible wavelength for all polymeric substrates is above 82 %.

키워드

참고문헌

  1. J. Vac. Sci. Technol. v.A16 Electrical, Optical, and structural properties of induum-tin-oxide thin films deposited on PET substrates by rf sputtering A. Kulkarni;T. Lim;M. Khan;K. Schulz
  2. Thin Solid Films v.223 Electrical and optical properties of ITO thin films deposited on unheated substrates by dc reactive sputtering T, Karasawa;Y. Miyata https://doi.org/10.1016/0040-6090(93)90737-A
  3. Trans. EEM. v.3 no.2 Figure of merit for deposition conditions in ITO films H.H.Kim;M.J.Cho;W.J.Choi;J.G.Lee;K.J.Lim
  4. 전기전자재료학회논문지 v.16 no.12 고분자 필름을 이용한 폴리이미드 표면에서의 프리틸트각 발생 박준백;황정연;서대식;박성규;문대규;한정인
  5. Thin Solid Films v.298 Deposition of indium tin oxide films on polycarbonate substrates by radio-frequency magnetron sputtering W. Wu;B. Chiou https://doi.org/10.1016/S0040-6090(96)09311-X
  6. Thin Solid Films v.270 Physics of very thin ITO conducting films with high transparency prepared by dc magnetron sputtering T. Minami;H. Sonohara;T. Kakumu;S. Takata https://doi.org/10.1016/0040-6090(95)06889-9
  7. 전기전자재료학회논문지 v.16 no.10 방전 플라즈마 해석을 통한 PDP용 ITO 투명전도막의 제작 및 특성 곽동주;조문수;박강일;임동건
  8. Surf. Coatings Technol. v.99 Techniques for the sputtering of optimum indium-tin-oxide films on to room-tem-perature substrates N.Danson;I.Safi;G.Hall;R.Howson
  9. J. Appl. Phys. v.89 no.9 Properties of dc magnetron sputtered indium tin oxide films on polymeric substrates at room temperature J. H. Shin;S. H. Shin;J. I. Park;H. H. Kim https://doi.org/10.1063/1.1357470
  10. Thin Solid Films v.293 Mechanical properties of rf magnetron sputtered indium tin oxide films W. Wu;B. Chiou https://doi.org/10.1016/S0040-6090(96)09105-5