Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Convective Heat Transfer in Micro Heat Exchanger Embedded in Stacked Multi-Chip Modules

적층형 Multi-Chip Module(MCM) 내부에 삽입된 초소형 열교환기 내에서의 대류 열전달 현상에 대한 연구

  • 신중한 (서울대학교 기계항공공학부) ;
  • 강문구 (서울대학교 기계항공공학) ;
  • 이우일 (서울대학교 전기컴퓨터공학부)
  • Published : 2004.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This article presents a numerical and experimental investigation for the single-phase forced laminar convective heat transfer through arrays of micro-channels in micro heat exchangers to be used for cooling power-intensive semiconductor packages, especially the stacked multi-chip modules. In the numerical analysis, a parametric study was carried out for the parameters affecting the efficiency of heat transfer in the flow of coolants through parallel rectangular micro-channels. In the experimental study, the cooling performance of the micro heat exchanger was tested on prototypes of stacked multi-chip modules with difference channel dimensions. The simulation results and the experiment data were acceptably accordant within a wide range of design variations, suggesting the numerical procedure as a useful method for designing the cooling mechanism in stacked multi-chip packages and similar electronic applications.

Keywords

References

  1. Gravesen, P., Branebjerg, J., and Sondergard, O., 1993, 'Microfluidics,' J. Micromech, Microeng. 3, pp. 168-182 https://doi.org/10.1088/0960-1317/3/4/002
  2. Peng, X. F., Wang, B. X., Peterson, G. P. and Ma, H. B., 1995, 'Experimental Investigation on Forced-Flow Convection of Liquid Flow Through Microchannel,' Int. J. Heat Mass Transfer 38(1), pp. 127-137 https://doi.org/10.1016/0017-9310(94)00136-J
  3. Peng, X. F. and Peterson, G. P., ,1995, 'the Effect of Thermofluid and Geometric Parameters on Convection of Liquid Through Rectangular Microchannels,' Int. J. Heat Mass Transfer 38(4), pp. 755-758 https://doi.org/10.1016/0017-9310(95)93010-F
  4. Peng, X. F. and Peterson, G. P., 1996, 'Convective Heat Transfer and Flow Friction for Water Flow in Microchannel Structures,' Int. J. Heat Mass Transfer, Vol. 39, No. 12, pp. 2599-2608 https://doi.org/10.1016/0017-9310(95)00327-4
  5. Wibulswas, P., 1966, 'Laminar Flow Heat Transfer in Non-Circular Ductt,' Ph. D. thesis, London University, London
  6. Choi, S. B., Barron, R. F. and Warrington, R. O., 1991, 'Liquid Flow and Heat Transfer in Microtubes.' In Micromechanical Sensors, Actuators and Systems (Edited by D. Cho et al.), ASME DSC-Vol. 32, pp. 123-134
  7. Weisberg, A., Bau, H. H. and Zemel,J., 1992, 'Analysis of Microchannels for Integrated Cooling,' Int. J. Heat Mass Transfer 35(10), pp. 2465-2474 https://doi.org/10.1016/0017-9310(92)90089-B
  8. Bowers, M. B. and Mudawar, I., 1994, 'High Flux Boling in Low Flow Rate, Low Pressure Drop Mini-Channel and Micro-Channel Heat Sinks,' Int. J. Heat Mass Transfer 37(2), pp. 321-332 https://doi.org/10.1016/0017-9310(94)90103-1
  9. Shoji., S. and Esashi, M., 1994, 'Microflow Devices and Systems,' Journal of Micromechanics and microengineering, Vol. 4 No. 4, pp. 157-171 https://doi.org/10.1088/0960-1317/4/4/001
  10. Bau, H.H., 1998, 'Optimization of Conduit's Shape in Micro Heat Exchangers,' Int. J. Heat Mass Trasfer, Vol. 41 No. 18, pp. 2717-2723 https://doi.org/10.1016/S0017-9310(98)00003-9
  11. Gillot, C., Bricard, A. and Schaeffer, C., 2000, 'Single-and Two-Phase Heat Exchanges for Power Electronic Components,' Internaional Journal of Thermal Sciences, Vol. 39 No. 8, pp. 826-832 https://doi.org/10.1016/S1290-0729(00)00278-7
  12. Hetsroni, G., Mosyak, A. and Segal, Z., 2001, 'Nonuniform Temperature Distribution in Electronic Devices Cooled by Flow in Parallel Microchannles,' IEEE Transactions on Components and Packaging Technologies, Vol. 24, No. 1, pp. 16-23 https://doi.org/10.1109/6144.910797
  13. Zhang, Lian, Koo, Jae-Mo, Jiang, Linan, Asheghi, M, Goodson, K.E., Santiago, J.G. and Kenny, T.W., 2002, 'Measurements and Modeling of Two-Phase Flow in Microchannels with Nearly Constant Heat Flux Boundary Conditions,' Journal of Microelectromechanical System : a Joint IEEE and ASME Publication on Microstructures, Microactuators, Microsensors, and Microsystems, Vol. 11 No. 1, pp. 12-19
  14. Peng, X.F., Hu, H.Y. and Wang, B.X., 1998, 'Boiling Nucleation During Liquid Flow in Microchannels,' Int. J. Heat Mass Transfer, Vol. 41 No. 1, pp. 101-106 https://doi.org/10.1016/S0017-9310(97)00096-3
  15. Huff, M. A., Mettner, M. S., Lober, T. A. and Schmidt, M. A., 1990, 'A Pressure-Balanced Electrostatically Actuated Microvalve,' Technical Digest IEEE Solid-State Sensor and Actuator Workshop, pp. 123-127 https://doi.org/10.1109/SOLSEN.1990.109835