참고문헌
- Cho, H. D. and Yang, M. Y., 1995, 'A Study on the Five-axis End Milling for Sculptured Surfaces,' KSME Journal, Vol. 9, No. 4, pp. 428-437 https://doi.org/10.1007/BF02953641
- Choi, B. K. and Jerard, R. B., 1998, 'Sculptured Surface Cutting,' Kluwer Academic Publishers
- Choi, B. K., Park, J. W. and Jun, C. S., 1993, 'Cutter-Location Data Optimization in 5-axis Surface Cutting,' Computer-Aided Design, Vol. 25, No. 6 June, pp. 377-386 https://doi.org/10.1016/0010-4485(93)90033-K
- FANUC Ltd., 1997, 'FANUC Series 15MA Operators Manual (programming) for Cutting,' FANUC
- Fleising, R. V. and Spence, A. D., 1997, 'Integrated Digitizing, Path Planning and Five-axis Cutting for the Refurbishment of Compressor and Turbine Blade,' Manufacturing Science and Technology, MED-Vol. 6-1 Volume 1
- Huang, Y. H. and Oliver, J. H., 1995, 'Integrated Simulation, Error Assessment, and Tool Path Correction for Five-axis NC Milling,' Journal of Manufacturing Systems, Volume 14 Number 5
- Jung, J. Y., 1998, 'Parametric Shape Design and CNC Tool Path Generation of a Propeller Blade,' Journal of the KSPE, Vol. 15, No. 8, pp. 46-59
- Kim, B. H. and Chu, C. N., 1994, 'A Study Quantitative Analysis of Surface Roughness for Precision Cutting of Sculptured Surface,' KSME Journal, Vol. 18, No. 6, pp. 1483-1495
- Lee, C.S., 1996, 'CAD/CAM,' Turbo-Tech (KOREAN)
- Lee, C. S., 1996, 'Surface Modeling and 5-axis NC Cutting of Automobile Tire Model,' IE-Interface, Vol. 9, No. 2, pp. 129-141
- Lee, G. Y., Nam, W. W. and S. J. Lee, 2001, 'The Tool path Generation for Free-Formed Surface with the Flat End-mill,' Journal of KSPE, Vol. 18, No. 4, pp. 104-111
- Lee, S. G. and Yang, S. H., 2001, 'CNC Tool Path Planning for Free-Form Sculptured Surface with a New Tool path Interval Algorithm,' Journal of KSPE, Vol. 18, pp. 43-49
- Lee, Y. S., 1998, 'Non-Isoparametric Tool Path Planning by Cutting Strip Evaluation for 5-axis Sculptured Surface Cutting,' Computer Aided Design,' Vol. 30, No. 7, pp. 559-570 https://doi.org/10.1016/S0010-4485(98)00822-7
- Lee, Y. S. and Chang, T. C., 1996, 'Machined Surface Error Analysis for 5-zxis Cutting,' INT. J. PROD.RES, Vol. 34, No 1, pp. 111-135 https://doi.org/10.1080/00207549608904894
- Li, Susan X. and Jerad, R. B., 1994, '5-axis Cutting of Sculptured Surfaces with a Flat-end Cutter,' Computer-Aided Design, Volume 26 Number 3, pp. 165-178 https://doi.org/10.1016/0010-4485(94)90040-X
- Park, Z. H., 1995, 'Development of A Five-axis CAM System for Free-Surface Grinding,' Doctor thesis, Mechanical Engineering Dept., KAIST
- Suh, S. H. and Lee, K. S., 1992, 'Avoiding Tool Inference in 4-axis NC Cutting of Rotationally Free Surfaces,' IEEE Trans on Robotics & Automation, 8 (6)