DOI QR코드

DOI QR Code

연속살균장치에서의 액상/고상 식품간의 대류열전달계수 예측

Fluid/Particulate Heat Transfer Coefficient in a Continuous Flow Cooking System

  • Choe, J.S. (School of Mechanical Engineering, Sangju National University) ;
  • Hong, J.H. (School of Mechanical Engineering, Sangju National University) ;
  • Koh, H.K. (Department of Agricultural and Biological Engineering, Seoul National University)
  • 발행 : 2004.04.01

초록

우리가 소비하는 가공 식품은 위생상 안전하도록 살균처리가 이루어진다. 식품 내에 존재할 수 있는 유해 세균은 일정 살균온도에서 살균에 필요한 시간 동안 노출되면 사멸하며, 일반적으로 살균온도가 높을수록 살균에 필요한 시간은 단축된다. 연속살균장치는 혼합 및 저장탱크에 담겨진 식품을 점프로 이동시키면서 가열 열교환기에서 살균온도로 가열하고 단열관을 거치는 동안 살균온도를 유지시켜 살균을 완료한다. 또한 살균된 식품은 냉각용 열교환기에서 상온으로 냉각되며 이 과정에서 회수되는 열은 저장탱크에서 유입되는 식품의 예열에 사용되어 에너지 효율을 제고하는데 사용되기도 한다. 이와 같이 관을 이동하면서 가열되는 살균장치는 기존의 배치식 살균방법에 비하여 균일하게 가열이 이루어지므로 130C의 고온으로 살균할 수 있어서 살균에 필요한 시간을 수초에서 수십초 정도로 단축시킬 수가 있고 그에 따라 열손상을 크게 줄일 수 있다. 또한, 상온으로 냉각된 식품을 포장함으로써 저렴한 가격의 포장용기를 사용할 수 있고 상온에서 저장할 수 있으므로 저장비용이 저렴한 장점이 있다. 그러나, 가공식품에 고기나 야채와 같은 고체 상태의 식품이 함유된 경우에는 액상 식품이 열 교환기에서 순간 가열되며, 고상 식품은 액상식품과의 대류에 의한 열전달로 가열된다. 이 과정에서 고상식품은 이동관 내벽이나 다른 고상식품과 부딪치거나 회전하면서 이동관 내부에서 자유롭게 운동하게 된다. 이 과정에서 액상식품과의 상대이동 속도가 발생하여 이것이 대류열전달에 영향을 미치게 된다. 이 상대이동속도에 따른 대류 열전달계수는 고상식품의 내부온도 결정에 사용되는 연속살균장치의 중요한 설계인자이다. 대류열전달계수는 연속살균장치에서 자유로이 이동하는 고상식품의 중심부의 온도를 측정하여 결정할 수 있으나 이는 현실적으로 어렵다. 따라서 본 연구에서는 고정된 고상식품에 액상식품을 이동시켜 상대속도를 재현하고 액상식품의 온도와 고상식품의 중심온도를 측정하는 장치를 개발하였으며, 각 상대속도와 액상식품의 점도 별 대류열전달계수를 결정하는 프로그램을 유한차분법을 이용하여 개발하였다. 이 장치를 분당 15, 30, 40 리터의 유량에서 유체의 점도를 0에서 15 centipoise 사이의 세 수준에서 정육면체 소고기를 모델 고상식품으로 내부 온도분포를 측정하였으며, 유한차분법 프로그램으로 대류열전달계수를 결정하였다. 대류열전달계수는 792에서 2,107 W/m$^2$로 분석되었다. 대류열전달 계수는 액상식품과의 상대속도가 증가함에 따라서 증가하였고, 점도가 증가함에 따라서는 감소하였다.

키워드

참고문헌

  1. Alhamdan, A., S. K. Sastry and J. L. Blaisdell. 1990. Natural convection heat transfer between water an irregular shaped particle. Transactions of the ASAE 33(2):620-624
  2. Black, D. G. 1994. Kinematics of elongated solid particles in viscous fluids. Unpublished Master's Thesis. Clemson University, Clemson, SC 29634
  3. Chandarana, D. I., A. Gavin, III and F. W. Wheaton. 1988. Particle/fluid interface heat transfer during aseptic processing of foods. ASAE Paper No. 88-6599. ASAE, 2950 Niles Rd., St. Joseph, MI 49085-9659
  4. Chang, S. Y. and R. T. Toledo. 1989. Heat transfer and simulated sterilization of particulate solids in a continuously flowing system. Journal of Food Science 54(4):1017-1023, 1030 https://doi.org/10.1111/j.1365-2621.1989.tb07935.x
  5. Croft, D. R. and D. G. Lilley. 1977. Heat transfer calculations using finite difference equations. Applied Science Publishers, LTD, London. pp. 185-187
  6. de Ruyter, P. W. and R. Brunet. 1973. Estimation of process conditions for continuous sterilization of foods containing particles. Food Technol. 27(7):44-51
  7. Hill, J. E., J. D. Leitman and J. E. Sunderland. 1967. Thermal conductivity of various meats. Food Technol. 21:1143-1148
  8. Hong, J., Y. J. Han and J. M. Bunn. 1998. Measurements of thermal conductivity of food products using a thermal probe method. ASAE Paper No. 98-6001. ASAE, 2950 Niles Rd., St. Joseph, MI 49085-9659
  9. Manson, J. E. and J. F. Cullen. 1974. Thermal process simulation for aseptic processing of food containing discrete particulate matter. Journal of Food Science 39:1084-1089 https://doi.org/10.1111/j.1365-2621.1974.tb07324.x
  10. Mohsenin, N. N. 1980. Thermal properties of foods and agricultural materials. Gordon and Breach Science Publishers, New York, NY.
  11. SAS. 1990. SAS/STAT User's Guide, Version 6, Fourth Edition. Statistical Analysis System Institute Inc., Cary, NC.
  12. Sastry, S. K. 1986. Mathematical evaluation of process schedules for aseptic processing of food containing discrete particulate matter. Journal of Food Science 51(5):1323-1328 https://doi.org/10.1111/j.1365-2621.1986.tb13114.x
  13. Zuritz, C. A., S. McCoy and S. K. Sastry. 1987. Convective heat transfer coefficients for non-Newtonian flow past food shaped particulates. ASAE Paper No. 87-6538. ASAE, 2950 Niles Rd., St. Joseph, Ml 490859659