참고문헌
- SAE Paper 930706 Aluminum-Plastic-Aluminum Sandwich Sheet for Maximum Weight Reduction in Body Panels E. W. Veenstra
- Metals and Mater v.5 no.6 Mechanical Properties of Aluminum/Polypropylene/ Aluminum Sandwich Sheets K. S. Shin;K. J. Kim;S. W. Choi;M. H. Rhee. https://doi.org/10.1007/BF03026313
- FISITA 2000 Development of Application Technique of Aluminum Sandwich Sheets for Automotive Hood M. H. Rhee;Y. M. Ryu;K. J. Kim;K. S. Shin;J. H. Kim;K. N. Lee
- J. of Mater. Proc. Tech. v.139 no.1-3 Formability of AA5182/Polypropylene/AA5182 Sandwich Sheets K. J. Kim;D. Kim;S. H. Choi;K. Chung;K. S. Shin;F. Barlat;K. H. Oh;J. R. Youn https://doi.org/10.1016/S0924-0136(03)00173-0
- J. of Mater. Sci. v.20 Calculation of Plastic Strain Ratio from the Texture of Cubic Metal Sheet D. N. Lee;K. H. Oh https://doi.org/10.1007/BF00545175
- Metall. Trans. v.19A Modeling of the Plastic Anisotropy of Textured Sheet P. Lequeu;J. J. Jonas
- Acta Mater. v.37 no.4 Recrystallization Textures in Iron Resulting from Nucleation at Grain Boundaries W. B. Hutchinson https://doi.org/10.1016/0001-6160(89)90101-6
- Acta Mater. v.41 no.3 Formation for a (001)[100] Deformation Structure in Aluminum Single Crystals of an S-Orientation T. Kamijo;H. Adachihara;H. Fukutomi https://doi.org/10.1016/0956-7151(93)90032-N
- J. Japan Inst. Metals v.60 no.11 Effect of Single Roller Driving Cold-Rolling on Texture and Formability of Pure Aluminum Sheet J. Hu;K. Ikeda;T. Murakami
- Mater. Sci. and Eng. v.A257 Effect of Intermediate Annealing on the R-Value of Al-Mg Alloy Sheet K. Hasegawa;T. Fujita;K. Araki;S. Mitao;K. Osawa;M. Niikura;K. Ohori
- J. of Mater. Proc. Tech. v.87 Predictions of Texture and Plastic Anisortopy Developed by Mechanical Deformation in Aluminum Sheet J. J. Park https://doi.org/10.1016/S0924-0136(98)00338-0
- Scripta Mater. v.42 Improvement in the R-Value of Aluminum Strip by a Continuous Shear Deformation Process Y. Saito;H. Utsunomiya;H. Suzuki;T. Sakai https://doi.org/10.1016/S1359-6462(00)00349-3
- Mater. Sci. Eng. v.A280 Microstructure and Texture Evolution in ECAE Processed A5056 C. Pithan;T. Hashimoto;M. Kawazoe;J. Nagahora;K. Higashi
- Mater. Sci. Eng. v.34 Influence of Friction and Geometry of Deformation on Texture Inhomogeneities during Rolling of Cu Single Crystals as an Example H. O. Asbeck;H. Mecking https://doi.org/10.1016/0025-5416(78)90041-1
- Metall. Trans. A v.13A On Penetration of Shear Texture into the Rolled Aluminum and Copper W. Truszkowski;J. Krol;B. Major
- Mater. Sci. Tech. v.8 Texture, Microstructure and stored Energy Inhomogeneity in Cold Rolled Commercial Purity Aluminum and Copper B. major. https://doi.org/10.1179/mst.1992.8.6.510
- Acta Metall. Mater. v.42 no.3 Relationship between Rolling Textures and Shear Textures in F.C.C. and B.C.C. Metals M. Holscher;D. Raabe;K. Lucke https://doi.org/10.1016/0956-7151(94)90283-6
- Acta. Metall. v.45 no.12 Analysis of Deformation Texture Inhomogeneity and Stability Condition of Shear Components in f.c.c. Metals C. H. Choi;J. W. Kwon;K. H. Oh;D. N. Lee
-
Proc. of the 16th Ris
${\phi}$ Inter. Symp. of Mater. Sci. Improvement of Lankford Value in Al-Mg Alloys by the Formation of (111) Recrystallization Texture T. Kamijo;H. Fukutomi - pH. D. Thesis of Seoul National Univ. Textures and Plastic Strain Ratios of Asymmetrically Rolled Aluminum Alloy sheets K. H. Kim
- Mater. Sci. and Tech. v.10 Effect of Rolling Geometry and Surface Friction on Cube Texture Formation C. S. Lee;R. E. Smallman;B. J. Duggan https://doi.org/10.1179/026708394790163780
- THERMEC 2000, Symp. on Textures in Mater.-Int. Conf. on Proc. and Manuf. of Adv. Ma. Variation of Shear Texture with Shear to Effective Strain Ratio in Rolled FCC Metal Sheet H. T. Jeong;K. K. Um;D. N. Lee;J. A. Szpunar
- Metals and Mater. Texture Evolution of AA5182 Aluminum Alloy Rolled Sheets after Annealing K. J. Kim;K. S. Shin
- Ddformation Geometry for Materials Scientists C. N. Reid
- ISIJ International v.31 Inhomogeneous Texture Formation in High Speed Hot Rolling of Ferritic Stainless Steel T. sakai;Y. Saito;M. Matsuo;K. Kawasaki https://doi.org/10.2355/isijinternational.31.86
- 2nd LIMAT v.II Texture Analysis of Aluminum Plate Produced by ECAP S. M. Baeck;H. K. Seok;J. C. Lee;K. H. Oh
- Scripta Mater. v.44 Improvement of the R-value in 5052 Aluminum Alloy Sheets Having Through-Thickness Shear Texture by 2-Pass Single-Roll Drive Unidirectional Shear Rolling T. Sakai;S. Hamada;Y. Saito https://doi.org/10.1016/S1359-6462(01)00932-0