Prediction of Oil Lifetime due to Overheating of Oil and Bearing Housing in a Pump

펌프 베어링하우징에서 베어링과 오일의 과열 및 오일수명 예측

  • Published : 2004.05.01

Abstract

An experimental study has been carried out to investigate overheating of oil and bearing housing during pump operation. This problem is of particular interest in the pre diction of lifetime and failure of pump. Transient variation of oil temperature as well as bearing housing temperature is measured to study the effect of oil viscosity, oil amount, and discharge flow rate of pump. It is found that optimal oil quantity as well as proper viscosity of oil is required to keep the safe temperature level of oil and bearing housing in a pump. The oil temperature at steady state is almost not affected by discharge flow rate in the range of discharge flow rates considered in the present study.

Keywords

References

  1. Korean Journal of Fluid Machinery Association v.2 no.1 The current situation of pump market and the development strategy of domain pump company Jung,W.S.
  2. Korean Journal of Air-Conditioning and Refrigeration Engineering v.12 no.8 An experimental study on the oil circulation in an inverter-driven heat pump Min,M.K.;Hong,K.S.;Hwang,W.J.
  3. Preload effects on the metal temperature and shaft vibration in a guide bearing for hydraulic pump-turbines Ha,H.C.;Yang,S.H.;Choi,S.P.
  4. SAREK 2001 Winter Annual Conference Effects of refrigerant and oil charges on the performance of an automobile air conditioner Sun,J.K.;Chae,S.N.;Jung,D.S.
  5. Applied Chemistry v.6 no.1 The life time of polyolester oils through oxidation stability analysis and TGA Yang,D.S.;Kim,Y.W.;Jung,K.W.
  6. KS B 6301 Testing methods for centrifugal pumps, mixed flow pumps and axial flow pumps
  7. KS M 2120 Turbine oils
  8. J. Korean Ind. Eng. Chem. v.13 no.8 Thermal stability and lifetime change characteristics of polyolester oils with temperature Yang,D.S.;Kim,Y.W.;Jung,K.W.